User Manual for Home Accents Holiday 22HD70001 7.5 FT Outdoor Winter Spruce Pre-Lit Tree
Quick guide for the Home Accents Holiday 22HD70001 7.5 FT Outdoor Winter Spruce Pre-Lit Tree. Includes assembly instructions, lighting operation, care, storage, and troubleshooting.
Quick answers from the manual
Quick answer
- This manual provides instructions for assembling the 7.5 FT Outdoor Winter Spruce Pre-Lit Tree, operating the lighting modes via remote or foot pedal, and proper storage procedures. p. 1, 4, 5
Key actions
- Assemble the tree by connecting sections A, B, and C into the stand and securing with eyebolts. p. 4
- Connect the male/female light connectors between each tree section. p. 4
First start
- Remove protective caps, assemble sections into the stand, connect light plugs, and plug the cord into an outlet. p. 4, 5
Show 4 more answers Show less
Problems and fixes
Check that all tree sections are securely connected and press the On/Off button on the remote or control box.
p. 5Maintenance and reset
- Unplug the tree, remove ornaments, lift sections apart, fold branches, and use protective caps for storage. p. 5
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Transformer Input | 120V, 60 Hz | Power input requirements | p. 2 |
| Transformer Output | 29V, 0.28A, 8W | Power output specifications | p. 2 |
| Remote Battery | CR2025 | Required battery model | p. 5 |
Where to find it in the PDF
- Safety Information p. 2
- Package Contents p. 3
- Installation p. 4
- Operation p. 5
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
This document provides instructions for the assembly, operation, and maintenance of the 7.5 FT Outdoor Winter Spruce Pre-Lit Tree. Key safety warnings include: do not connect extra light sets or tree toppers to the existing system, do not place the tree near combustible sources like heaters or candles, and unplug the product when leaving the house or unattended.
Package contents

- Tree Section A, B, and C (with plug)
- Tree Stand
- Eyebolt Screws (3)
- Remote Control
- Ground Anchors (4)
Installation
Preparing the tree and stand:

- Lay sections on the ground in alphabetical order.
- Remove plastic protective caps from the ends of each pole (save these for storage).
- Open the metal stand to form an X shape and align the holes.
- Thread the eyebolt screws through the stand until they are flush with the inside of the tube.
- Place the stand on a stable, even surface.
Assembling the tree:
- Place section C into the stand and secure with eyebolts. Ensure it is straight.
- Insert section B into section C and connect the male/female light connectors.
- Repeat the connection process for section A into section B.
- Shape the branches by bending tips upward or downward to fill gaps and create a fuller appearance.
Operation
To turn the lights on, plug the cord into an outlet. You can control the lighting using the remote control or the foot pedal switch.

- Remote Control: Pull the tab out of the battery compartment to activate. Use the ON button and cycle through lighting options. Requires a CR2025 battery.
- Foot Pedal Switch: Press the switch until it clicks to cycle through functions.
Available lighting options: Steady, Fading, Random twinkle, All twinkle, Off.
Care and storage
- Before disassembling, unplug the tree and remove all ornaments.
- Lift the tree top straight up to remove from the center section and fold branches towards the pole. Repeat for all sections.
- Use the protective caps to cover the poles to prevent damage.
- Store in a cool, dry location away from sunlight and out of reach of children and pets.
Troubleshooting
If the tree does not light when plugged in, check that all tree sections are securely connected to each other. Press the On/Off button on either the remote control or the control box on the plug.
Manufacturer information
Home Accents Holiday
Practical help
Common problems
Check to ensure all tree sections are securely connected to each other. Press the On/Off button on either the remote control or the control box on the plug.
Before use
- Compare all parts with the Package Contents list.
- Ensure the stand is on a stable and even space.
- Remove plastic protective caps from the ends of each pole.
- Ensure all tree sections are securely connected.
Show more Show less
Specs in practice
- Transformer Input
- 120V, 60 Hz
- Transformer Output
- 29V, 0.28A, 8W
- Remote Battery
- CR2025
Model compatibility
- Do not connect extra light sets, tree toppers, or any other electrical items to the existing light sets.
- Only use outdoors if marked suitable for indoor and outdoor use.
Manual page author
David Miller
Documentation analyst