User Manual for Home Accents Holiday 22HD90004 7.5 ft Maysville Pine Artificial Pre-Lit Tree

Important Information

This guide provides instructions for the 7.5 ft Maysville Pine Artificial Pre-Lit Tree. Before assembly, verify all parts are present. The tree is intended for indoor use only and is not a toy. Do not connect extra light sets to this product.

Safety Information

• Indoor Use Only: Do not use outdoors unless marked suitable.
• Electrical Safety: Do not secure wiring with staples or nails. Unplug when leaving the house or unattended.
• Fire Hazard: Do not mount or place the tree near gas or electric heaters, fireplaces, candles, or other similar combustible sources.
• Decoration Only: Keep small children away from the product.
• Transformer Rating: 120V, 60 Hz (input) and 29V, 0.28A, 8W (output).

Package Contents

Ensure you have the following components:

• A: Tree Section A
• B: Tree Section B
• C: Tree Section C (with plug)
• D: Tree Stand
• E: Eyebolt Screw
• F: Remote Control

Installation

Preparing the Tree and Stand

1. Lay the three tree sections on the ground in alphabetical order.
2. Remove plastic protective caps from the end of each pole (save these for storage).
3. Open the metal stand (D) into an "X" shape.
4. Thread the eyebolt screw (E) through the stand until you feel the end of the screw flush with the inside of the tube.
5. Ensure the stand is on a stable, even surface.

Assembling the Tree

1. Place tree section C firmly into the stand (D) and secure with the eyebolt (E). Ensure it is standing straight.
2. Insert tree section B into the top of tree section C.
3. Insert tree section A into the top of tree section B.
4. Shape the branches by pulling tips downward and some upward to fill gaps for a fuller appearance.

Operation

To turn the lights on, plug the cord into an outlet. You can control the lighting using the foot pedal or the remote control.

Lighting Options:

• Steady Warm White
• Steady Multi
• Warm White to Multi
• Warm White & Multi Fading
• Warm White Glow
• Multi Glow
• Warm White Sparkle
• Multi Sparkle
• Repeat all 8 functions
• Off

Care and Storage

• Disassembly: Unplug the tree and remove all ornaments. Do not pull on the cord when unplugging.
• Folding: Lift the tree top straight up to remove from the center section and fold all branches towards the pole.
• Storage: Use the protective caps to cover the poles to avoid damaging internal parts. Store in a cool, dry location protected from sunlight.
• Safety: Keep out of reach of pets and children.

Troubleshooting

If the tree does not light when plugged in, check to ensure all tree sections are securely connected to each other. Verify the connection at the control box on the plug and check the remote control.