findmanualpdf.com

User Manual for Home Accents Holiday 22PG90213 Westwood Fir Slim LED Christmas Tree

Comprehensive user guide for the Home Accents Holiday 22PG90213 Westwood Fir Slim LED Christmas Tree. Includes step-by-step assembly, operation, maintenance, and troubleshooting instructions.

Quick answers from the manual

Quick answer

  • The Home Accents Holiday 22PG90213 is a Quick Set LED Christmas tree. Assembly involves setting up the stand, connecting the tree sections by aligning the arrows, and plugging in the adapter. p. 1, 2

Key actions

  • Assemble the stand p. 1
  • Connect tree sections p. 1, 2
  • Power on the tree p. 1, 2

First start

  • Remove protective caps, assemble the stand, connect tree sections, shape branches, and plug in the adapter. p. 1
Show 3 more answers Show less

Problems and fixes

The tree does not light

Ensure all tree sections are plugged into each other, the tree is plugged into the wall, and the foot pedal is pressed.

p. 2

Maintenance and reset

  • Repair loose hinges by placing the branch into the bracket slot, inserting a new hinge pin, and securing with a washer. p. 2

Where to find it in the PDF

  • Assembly and Safety p. 1
  • Operation, Maintenance, and Troubleshooting p. 2
Table of contents

Quick Guide from the Manual

This guide provides instructions for the Home Accents Holiday 22PG90213 Westwood Fir Slim LED Christmas Tree. The tree features a Quick Set design for rapid assembly. Always inspect the product for damaged wires before use and use only the provided power adapter.

Assembly

Assembling the Tree Stand

Assembling the tree stand
Assembling the tree stand
  • Pull the legs of the stand apart until they snap into an x-shape.
  • Place the stand on a level surface.
  • Insert the bottom section of the tree into the stand.
  • Insert and turn the eyebolts into the stand and tighten until the tree pole is firmly secured.
  • To close the stand, remove the eyebolts, press the metal button, and fold the legs together.

Assembling the Tree

  • Remove the protective caps from the tree bottom and insert the pole into the tree stand. Do not step on the stand legs during setup.
  • Insert the upper tree sections into the lower sections until you reach the tree top.
  • Shape the branches from the bottom to the top. Ensure all wires are free of branch hinges.
  • Insert the adapter into the wall outlet to light the tree.
  • Fan out branches in a star shape, starting from the pole outwards.
  • Slightly upsweep branch tips for a uniform look.

Operation

Connect the light strings together and plug the adapter into a wall outlet. If your tree includes a foot pedal, step on the On/Off button to operate the lights.

Maintenance

  • Spare Parts: The package includes hinge pins and washers for repairs. Contact customer service if extra parts are needed.
  • Repairing Loose Hinges: Place the branch into the bracket slot, insert a new hinge pin through the holes, and secure with a washer.
  • Storage: Remove the product from its location, unplug, and remove all ornaments. Gently lift the tree top straight up to remove from the center section and fold all branches towards the pole. Repeat for all sections. Cover the protective cap on the poles to avoid damaging internal parts. Store in a cool, dry location protected from sunlight.

Safety Information

  • Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use.
  • Do not mount or place near gas or electric heaters, fireplaces, candles, or other heat sources.
  • Do not secure wiring with staples or nails.
  • Unplug the product when leaving the house, retiring for the night, or if left unattended.
  • Do not hang ornaments or other objects from the cord, wire, or light string.
  • Do not cover the product with cloth, paper, or any material not part of the product.
  • The lamps are not replaceable. Do not attempt to modify them.

Manufacturer information

Home Accents Holiday

Brand profile

Practical help

Common problems

The tree does not light

Ensure all tree sections are plugged into each other, the tree is plugged into the wall, and the foot pedal (if included) is switched on.

Branch hanging low

Bend the branch up.

Tree not full

Spread the branches.

Before use

  • Inspect product for cut, damaged, or frayed wire insulation.
  • Check for cracks in lampholders or enclosures.
  • Ensure no loose connections or exposed copper wire.
  • Remove protective caps from tree poles before assembly.
Show more Show less

Images and diagrams

  • Stand assembly: Pull legs into x-shape and secure with eyebolts.
  • Tree assembly: Align arrows on poles before sliding sections together.
  • Troubleshooting: Check connections between sections if lights fail.

Model compatibility

  • Use only the power adapter provided with this product to avoid fire or electrical shock.

Manual page author

Michael Turner

Technical manual editor

Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.