User Manual Immax 08488L Outdoor Solar LED Wall Light

Quick guide from the manual

Before using your Immax 08488L solar light for the first time, it is essential to charge it in direct sunlight for at least 4-6 hours. The light is designed to charge during the day and turn on automatically after dark. If the light does not function correctly or has a short working time, place it in direct sunlight for 2 days to fully charge the battery; do not turn the light on during this process.

Technical Parameters

• Solar panel: Monocrystalline silicon 5V/1.2W
• Battery: 18650 lithium iron phosphate 3.2V/1300mAh
• Charging time: 4-5 hours
• Working time: 10-12 hours (depending on battery charge)
• Protection: IP54
• Color temperature: 6000-6500K / 3000-3500K

Installation

1. Use the provided paper template to mark the positions for the holes.
2. Drill the holes using a drill.
3. Insert the dowels into the drilled holes and screw in the screws.
4. Switch on the lamp and mount it onto the screws.

Operation

The light is controlled via a single switch:

• First press: Light turns on at 100% brightness.
• Second press: Light turns on at 50% brightness.
• Third press: Light turns off.
• Hold for 2-3 seconds: Changes the color temperature (Warm / Cool light).

Maintenance and Warnings

To ensure the photovoltaic panel receives maximum solar radiation, keep it clean by wiping it with a soft, damp cloth. Avoid using abrasive or cleaning agents.

Important Notices:

• Install the product in a location free from obstacles like trees or gutters that could block sunlight.
• Do not install the product under other lamps, as artificial light may cause the sensor to malfunction or the light to flash.
• The light sensor requires a dark environment to activate.
• Do not immerse the solar panel in water.
• Recycle batteries in accordance with local laws and regulations.