Lighting / Fixtures
User Manual for Immax TIT LED Floor Lamp
Quick guide for the Immax TIT LED Floor Lamp. Includes installation steps, operation instructions for the rotary and push-button switches, technical specifications, and safety warnings.
Table of contents
Quick guide from the manual
To set up your Immax TIT LED floor lamp, connect the power supply to the lamp first, and only then connect the adapter to the electrical mains. Use only the original power adapter provided with the product. Do not use extension cords or hubs.
Product Description
The Immax TIT is an LED floor lamp featuring a shade equipped with both a rotary switch and a push-button switch for easy control of brightness and color temperature.
Operation
Push Button Switch:
- Press briefly to turn the lamp on or off.
- Press and hold to cycle through the CCT color temperatures: warm, natural, and cool.
Rotary Switch:
- Turn clockwise to increase brightness.
- Turn counterclockwise to decrease brightness.
Technical Specifications
- Power Consumption: 6W (DC 12V/0.5A)
- Input Voltage: 100-240 VAC, 50/60 Hz
- Color Temperature: 3000K (warm), 4200K (natural), 5000K (cool)
- Luminous Flux: 200 lm (warm/cool), 400 lm (natural)
- Dimensions: 20 x 20 x 143 cm
- Weight: 2400 g
- Protection Rating: IP20
Safety and Maintenance
- Clean the surface only with a dry, soft cotton cloth. Do not use any other cleaning agents.
- The light source is irreplaceable.
- Do not attempt to repair or disassemble the product yourself, as this may cause mechanical damage and void the warranty.
- If the lamp is noisy or the lights are on, check the power supply.
Manufacturer information
Immax
Practical help
Common problems
Lamp is noisy or lights are on unexpectedly
Check the power supply connection.
Product failure
Do not repair or disassemble the product yourself; contact the manufacturer.
Before use
- Ensure you are using the original power adapter.
- Verify the adapter matches the 12V output requirement.
- Connect the power supply to the lamp before plugging into the mains.
- Do not use extension cords or hubs.
Images and diagrams
- The installation diagram illustrates the connection sequence: connect the power adapter to the lamp body first, then plug the adapter into the wall socket.
Model compatibility
- Only use the original 12V power adapter provided with the product.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.