Smart Home / Smart Plugs & Strips
User Manual for Immax NEO Smart Internal Socket Nexa 07552L
Quick guide for the Immax NEO Smart Internal Socket Nexa (07552L). Learn how to pair with the Immax NEO PRO app, reset the device, and safely operate your smart plug with USB-A and USB-C ports.
Table of contents
Quick guide from the manual
The Immax NEO Smart Internal Socket Nexa (07552L) is a Zigbee 3.0 smart plug designed for home automation. To use this device, you must have an Immax NEO PRO smart gateway. The device supports remote control, timers, countdowns, and consumption measurement via the Immax NEO PRO application.
Installation
Warning: Installation must be performed by a person with appropriate electrical certification. Ensure the power cable is disconnected from the socket (or the relevant circuit breaker is turned off) before installation. The installation site must be equipped with wires in accordance with applicable regulations.
App Setup and Pairing
- Ensure your mobile phone and the Immax NEO PRO smart gateway have an active internet connection.
- Turn on the Immax NEO product. The LED should flash quickly. If it does not, reset the device.
- Open the Immax NEO PRO application and tap the '+' icon to add a new device.
- Select the 'Immax NEO' category in the left column.
- Choose the device from the offered products (select 'Other zigbee devices' if necessary).
- Select the smart gateway you wish to pair with.
- Follow the on-screen instructions to complete the pairing process.
Reset Procedure
If the device fails to pair or you need to reconfigure it, you must reset it to pairing mode:
- Press and hold the ON/OFF button for at least 5 seconds.
- The LED backlight will start flashing, indicating the device is in pairing mode.
Safety and Warnings
- Do not overload: The maximum load is 3200W (16A). Connecting devices that exceed this rating may cause overheating or damage.
- Do not disassemble: Never attempt to repair, disassemble, or modify the equipment.
- Environment: Do not use the outlet in high humidity environments, near heat sources, or in direct sunlight.
- Handling: Keep the outlet dry and clean. Do not use solvents or aggressive cleaners.
- Safety: Keep out of reach of children.
Technical Specifications
- Protocol: Zigbee 3.0
- Voltage: AC 230V, 50/60 Hz
- Max Load: 3200W, 16A
- USB Output: 20W total (USB-A: 9V/2.2A, 12V/1.67A; USB-C: 9V/2.2A, 12V/1.67A)
- Wireless Range: 30m line of sight, 5m in built-up area
- Operating Temperature: 0°C to 40°C
- Protection Level: IP20
Manufacturer information
Immax
Practical help
Common problems
Device not pairing with the application.
Ensure the LED is flashing quickly. If not, perform a reset by holding the ON/OFF button for 5 seconds.
Strange smell or smoke coming from the outlet.
Immediately disconnect the device and contact customer support.
Device overheating.
Check if the connected load exceeds the 3200W/16A limit.
Before use
- Ensure you have an Immax NEO PRO smart gateway.
- Verify that your mobile phone and gateway have an internet connection.
- Check that the power cable is not damaged.
- Ensure the installation site complies with local electrical regulations.
- Confirm the device is not being installed in a high-humidity environment.
Specs in practice
- Max Load 3200W / 16A
- The absolute maximum power capacity of the socket. Do not exceed.
Model compatibility
- Requires Immax NEO PRO smart gateway for operation.
- Compatible with Zigbee 3.0 protocol.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.