Industrial / Electrical
User Manual for Immax NEO Smart Switch Aria 1-button 07546L
Quick guide for the Immax NEO Smart Switch Aria 1-button (07546L). Includes installation steps, wiring diagram, app pairing instructions, and technical specifications.
Table of contents
Manual images
Jump to the sectionQuick guide from the manual
This document provides instructions for the Immax NEO Smart Switch Aria 1-button (07546L). The device is a WiFi-enabled smart switch designed for indoor use. Key requirements include a 2.4GHz WiFi network and proper electrical installation by a qualified person. Always ensure power is disconnected before installation.
Technical Specifications
- Protocol: Wi-Fi 802.11 b/g/n
- Frequency: 2.4GHz
- Power Input: AC 100-240V, 50/60Hz
- Max Load: 800W (max 2 LED lights)
- Max Current: 10A
- Protection Degree: IP20 (Indoor use only)
- Operating Temperature: -10°C to 40°C
- Dimensions: 86 x 86 x 34mm
Installation
- Disconnect the button and frame from the base.
- Connect the switch according to the wiring diagram.
- Install the base in the desired location.
- Install the frame and then the button.
Wiring Diagram
The device requires connection to the Live (L) and Neutral (N) lines. Ensure all wiring complies with local electrical regulations. Installation must be carried out by a qualified electrician.
Pairing and Setup
To connect the device to your smart home system:
- Download the Immax NEO PRO app from the App Store or Google Play.
- Register or log in to your account.
- Turn on Bluetooth on your phone.
- In the app, tap the '+' icon in the upper right corner and select 'Add Device'.
- Wait for the device to be found, then select 'Add'.
- Enter your WiFi network details and wait for the connection to complete.
Resetting the Device
If you need to enter pairing mode or reset the device:
- Press the button shown in the diagram simultaneously for at least 3 seconds.
- The LED backlight will start flashing.
- Release the button; the device is now in pairing mode.
Safety and Maintenance
- Keep out of reach of children; contains small parts.
- Do not use harsh or coarse materials for cleaning.
- Do not use solvents or aggressive cleaning agents.
- The device is not waterproof (IP20); protect from contamination and dirt.
- Do not disassemble the product to avoid the risk of electric shock.
Manufacturer information
Immax
Practical help
Common problems
Device not pairing
Ensure Bluetooth is enabled on your phone, the phone is near the switch, and the device is in pairing mode (LED flashing).
Switch not functioning
Verify that the power supply is connected correctly according to the wiring diagram and that the circuit breaker is active.
Before use
- Ensure power is disconnected at the circuit breaker before starting installation.
- Verify that the load does not exceed 800W.
- Download the Immax NEO PRO app.
- Ensure a 2.4GHz WiFi network is available.
- Confirm the installation location is indoors (IP20 rating).
Specs in practice
- Max Load: 800W
- The maximum power capacity for connected lighting; do not exceed this limit.
- Protocol: WiFi 2.4GHz
- Requires a 2.4GHz WiFi network; 5GHz networks are not supported.
Images and diagrams
- The wiring diagram illustrates the connection of Live (L) and Neutral (N) wires to the switch terminals.
Model compatibility
- Requires 2.4GHz WiFi network.
- Not suitable for outdoor use (IP20).
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.