User manual for Immax NEO 07538L Smart Switch

Quick guide from the manual

The Immax NEO 07538L is a 1-button smart switch designed for indoor use. Installation must be performed by a person with appropriate electrical certification. The device requires a 2.4GHz WiFi connection and is managed via the Immax NEO PRO application.

Installation and Wiring

Before starting, ensure the power is disconnected at the circuit breaker. Follow these steps for installation:

1. Disconnect the button and frame from the base.
2. Connect the switch according to the wiring diagram (ensure L and N wires are connected correctly).
3. Install the base in the desired location.
4. Install the frame and then the button.

App Pairing and Setup

To connect the device to your smart home system:

• Download and install the Immax NEO PRO app from the App Store or Google Play.
• Register or log in to your account.
• Turn on Bluetooth on your phone.
• In the app, tap the + icon in the upper right corner of the Home page and select Add Device.
• Wait for the app to find the device, select Add, and enter your WiFi network credentials.

Device Reset

If you need to re-pair the device or troubleshoot connection issues, you can reset it to pairing mode:

• Press the button on the switch for at least 3 seconds.
• The LED backlight will start flashing, indicating the device is in pairing mode.

Technical Specifications

• Protocol: Wi-Fi 802.11 b/g/n (2.4GHz)
• Power Input: AC 100-240V, 50/60Hz
• Max Load: 800W (max 2 LED lights)
• Max Current: 10A
• Operating Temperature: -10°C to 40°C
• Protection Rating: IP20
• Dimensions: 80 x 80 x 47mm

Safety Information

Keep the device out of reach of children as it contains small parts. Do not disassemble the product to avoid the risk of electric shock. Use only the original power supply. If the device or power cord shows signs of damage, do not operate it. Protect the device from contamination and dirt; clean only with a soft cloth without harsh chemicals.