User Guide for Innokin Endura V Pod Kit 1200mAh

Quick guide from the manual

The Innokin Endura V is a compact pod system designed for MTL (mouth-to-lung) vaping. Key operations include automatic draw activation, adjustable power (5-30W), and adjustable airflow. Always wait 5-8 minutes after filling a new cartridge before vaping to ensure the coil is properly saturated.

Device Operation

• Power On/Off: Press the fire button 5 times rapidly.
• Lock/Unlock Button: Press the fire button 4 times rapidly.
• Adjust Power: Press the fire button 3 times rapidly. When the power indicator flashes, press the button to cycle through power levels.
• Airflow Control: Use the slider located on the side of the device body to adjust the air intake.
• Vaping: Simply inhale from the mouthpiece; the device activates automatically.

Cartridge Setup

1. Remove the cartridge from the packaging.
2. Peel off any protective plastic film from the bottom contacts.
3. Open the silicone plug on the top of the cartridge.
4. Fill with e-liquid and securely close the silicone plug.
5. Insert the cartridge into the battery body.
6. Wait 5-8 minutes before first use.

Charging

Connect the device to a power source using a USB-C cable. The recommended adapter specification is 5V / 2A. Never leave the device charging unattended.

Maintenance and Safety

• Keep the contacts between the cartridge and the battery clean. Wipe away any condensation with a paper tissue.
• Use appropriate e-liquid viscosity to prevent leaking or spitting.
• Avoid dropping or hitting the device to prevent internal damage.
• Store away from flammable materials, extreme temperatures, direct sunlight, dust, and moisture.

Technical Specifications

• Dimensions: 110.5 x 25.9 x 15.8 mm
• Battery Capacity: 1000 mAh
• Output Power: 5-30W (adjustable)
• Cartridge Capacity: 2 ml
• Resistance: 0.6 Ohm
• Charging: USB-C (5V / 1A)