Lighting / Fixtures
User Manual for Invicta Interior 19472 Floor Lamp
Quick guide for the Invicta Interior 19472 floor lamp. Includes assembly instructions, safety warnings, bulb replacement, and maintenance tips.
Quick answers from the manual
Quick answer
- The Invicta Interior 19472 is a floor lamp designed for indoor use. Assembly involves placing the shade on the holder and securing it with the lamp skirt. p. 1
Key actions
- Assemble the shade p. 1
- Replace the bulb p. 2
First start
- Place the shade on the lamp holder (A) and secure it with the lamp skirt (B). Install a bulb and use the in-line switch. p. 1
Maintenance and reset
- Wipe with a damp clean fabric. Never soak the fitting component with water. p. 2
Where to find it in the PDF
- Assembly Instructions p. 1
- Maintenance Tips p. 2
Table of contents
Important information from the manual
This document provides essential assembly and safety instructions for the Invicta Interior 19472 floor lamp. The product is intended for indoor decorative use only. Ensure the lamp is placed on a dry, clean, and flat surface. Do not exceed the maximum wattage rating for the bulb.
Safety instructions
- Do not operate or install the product if any damage is found.
- Do not attempt to repair or reinstall the product yourself; return it to the place of purchase for inspection.
- Do not move the product by pulling the power cord, as this may damage the electrical system.
- Ensure the power is disconnected before moving the lamp.
- Avoid placing the lamp in high-moisture areas to prevent mold growth.
Assembly
Follow these steps to assemble the lamp shade:
- Place the shade onto the lamp holder (A).
- Secure the shade by screwing down the lamp skirt (B).
- Install the bulb (not included).
- Use the in-line switch to turn the lamp on or off.
Bulb replacement and maintenance
To ensure safety and longevity of the product, follow these guidelines:
- Cooling: Always allow the bulb to cool down completely before cleaning or replacing it.
- Handling: Do not touch bulbs with bare hands. Use dry gloves or a dry fabric to protect your hands from residual heat.
- Cleaning: Wipe the lamp with a damp, clean fabric. Never soak the fitting components in water.
- Environment: Perform cleaning or bulb changes in a location away from liquids, moisture, and chemicals.
Manufacturer information
Invicta Interior GmbH & Co. KG
Practical help
Common problems
Bulb is too hot to handle
Wait for the bulb to cool down completely and use dry gloves or a dry cloth to handle it.
Mold growth on the lamp
Ensure the lamp is not placed in high-moisture areas.
Electrical system damage
Do not move the lamp by pulling the power cord; always disconnect power before moving.
Before use
- Check that the product and all components are in good condition.
- Ensure the installation surface is dry, clean, and flat.
- Verify that the power connection is off before moving the lamp.
- Ensure you have a compatible bulb (not included).
Images and diagrams
- The shade installation diagram shows the shade being placed over the lamp holder (A) and secured from above with the lamp skirt (B).
Model compatibility
- Indoor use only.
- Do not exceed the maximum wattage rating.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.