Lighting / LED Lamps
User Manual for Leedarson 11A19060WCCTMxx LED Lamp
Quick guide for the Leedarson 11A19060WCCTMxx LED Lamp. Includes motion sensor specifications, operating voltage, startup behavior, and FCC compliance information.
Table of contents
Quick guide from the manual
This document provides the technical specifications and operational characteristics for the Leedarson LED Lamp. Please note the specific startup behavior of the device to ensure proper installation and usage.
Startup and Operation
When the bulb is powered on, it will light up for approximately 10 seconds. After this initialization period, the light will turn off, and the motion sensor will begin to detect movement in the surrounding area.
Motion Sensor Specifications
- Detection Range: The motion sensor has a detection range of 25 feet.
- Hold-time: The light will remain on for 35 seconds (±3 seconds) after motion stops.
Technical Specifications
- Product Name: LED LAMP
- Model No: 11A19060WCCTMxx
- Working Voltage: 120Vac
- Microwave Frequency Band: 5.8 GHz ±75MHz
Regulatory Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device. If this equipment causes harmful interference to radio or television reception, the user is encouraged to try to correct the interference by reorienting the receiving antenna, increasing the separation between the equipment and receiver, or connecting the equipment into an outlet on a different circuit.
Manufacturer information
Leedarson IoT Technology Inc.
Practical help
Common problems
The light does not turn on immediately upon power-up.
The bulb performs a 10-second initialization sequence when first powered on. It will light up, then turn off, before the motion sensor becomes active.
The light turns off too quickly after I stop moving.
The hold-time is fixed at 35 seconds (±3s) after motion stops. Ensure you are within the 25 ft detection range.
Before use
- Ensure the power supply is 120Vac.
- Verify the installation location is within the 25 ft motion detection range.
- Allow for the 10-second initialization period upon first power-up.
Specs in practice
- Working Voltage
- 120Vac - Ensure your fixture supports this standard residential voltage.
- Microwave Frequency Band
- 5.8 GHz - The technology used for motion detection.
- Motion Sensor Detect Range
- 25 Ft - The maximum distance the sensor can detect movement.
Model compatibility
- Designed for residential installations compliant with Class B digital device limits.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.