User Manual for Leedarson 14aSA-PR1800ST-W1MS-01 LED Lamp

Quick guide from the manual

The Leedarson 14aSA-PR1800ST-W1MS-01 is an LED lamp equipped with an integrated microwave motion sensor. Key operational requirements include a 60-second warm-up period after power is applied and proper installation orientation for optimal detection. Note that because it uses a microwave sensor, it may detect motion through walls.

Installation

1. Turn off the power to the light fixture.
2. Install the LED light bulb into the fixture.
3. Turn the power on to the light fixture.
4. Wait 60 seconds for the bulb to calibrate; after this time, the motion sensor will be active.

Operation

Once the 60-second warm-up period is complete, the bulb operates automatically based on motion detection:

• Motion Detection: The bulb will turn on automatically when motion is detected.
• Hold Time: The bulb will remain on for 60 seconds after motion is no longer detected.
• Power Requirement: Power must be continuously supplied to the fixture for the bulb to function correctly.

Tips for best performance

• Orientation: For best performance, install the light bulb facing downwards.
• Height: The sensor is optimized for fixtures installed at a height of 9ft.
• Fixture Material: Be aware that some metal fixtures may impact the performance of the motion sensor.
• Settings: Please select color temperature and motion sensor settings while the power is off.

Recommended Applications

This LED lamp is suitable for use in the following areas:

• Driveways
• Hallways
• Staircases
• Porches
• Closets

Safety and Compliance

This equipment complies with FCC radiation exposure limits for an uncontrolled environment. It should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that the device does not cause harmful interference and must accept any interference received.