Power / Power Banks
User Manual for Pisen Quick Power Cube 22.5W 10000mAh Power Bank (TP-D183)
Quick guide for the Pisen Quick Power Cube 22.5W 10000mAh Power Bank (TP-D183). Learn how to operate the device, understand charging specifications, and follow safety guidelines.
Table of contents
Quick guide from the manual
The Pisen Quick Power Cube is a 10000mAh portable power bank designed to charge mobile devices. To use the device, press the control button to initiate charging. The power bank features a low-current mode for smaller devices, which can be activated by pressing and holding the button for 3-5 seconds during active charging. To exit this mode, press and hold the button again for 3-5 seconds.
Product interface
The device features an LED screen to display status, a control button, and multiple output ports:
- USB-A1 Output
- USB-A2 Output
- Type-C Input/Output
Operating instructions
To ensure safe operation, the device includes an over-temperature protection feature. If the main control IC temperature exceeds 120°C, the power bank will automatically shut down output. Normal operation will resume once temperatures return to safe levels.
Specifications
The power bank has the following technical specifications:
- Model: TP-D183
- Battery Energy: 10000mAh / 37Wh
- Rated Capacity: 5800mAh (2A)
- Input: Type-C: 5V=3A, 9V=2A, 12V=1.5A
- Output: USB-A1/A2: 5V=3A, 9V=2A, 10V=2.25A, 12V=1.5A; Type-C: 5V=3A, 9V=2.22A, 12V=1.5A
- Maximum Power: 22.5W
- Dimensions: 147.5 x 68.5 x 17mm
- Weight: Approx. 220g
Safety and maintenance
To maintain the longevity and safety of the power bank, observe the following precautions:
- Operate and store the power bank within a temperature range of 0°C - 35°C.
- Do not expose the power bank to direct sunlight, water, or corrosive liquids.
- Do not throw, squeeze, or disassemble the power bank.
- Do not place the power bank on flammable items like textiles or carpets.
- Stop using the power bank immediately if it swells or malfunctions.
Manufacturer information
Guangdong Pisen Electronics Co., Ltd.
Practical help
Common problems
Power bank shuts down automatically
The device has over-temperature protection. If the internal temperature exceeds 120°C, it will shut down. Wait for it to cool down to resume operation.
Charging small devices (e.g., wearables)
Use the low-current mode. Press and hold the control button for 3-5 seconds during active charging to enable this mode.
Before use
- Ensure the ambient temperature is between 0°C and 35°C.
- Check that your device is compatible with the power bank's output specifications.
- Charge the power bank fully before first use.
- Do not use the power bank if it is wet.
Show more Show less
Specs in practice
- Low-current mode
- A specific mode for charging low-power devices like smartwatches or headphones.
Model compatibility
- An 18W charger is recommended for charging the power bank itself (charger not included).
- The power bank supports fast charging protocols via USB-A and Type-C ports.
Manual page author
David Miller
Documentation analyst