Tools / Drills
Parts List for Pretul BOPA-1P Peripheral Pump
View the official parts list and exploded view diagram for the Pretul BOPA-1P 1HP peripheral pump. Identify components and part codes for maintenance and repairs.
Quick answers from the manual
Quick answer
- This document is a parts list and exploded view diagram for the Pretul BOPA-1P 1HP peripheral pump. It allows users to identify specific components and their corresponding codes for ordering replacements from authorized service centers. p. 1
Key actions
- Order replacement parts by contacting authorized TRUPER service centers or calling 800-018-7873. p. 1
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Motor Power | 1 HP | Motor power rating | p. 1 |
| Capacitor | 25µF | Starting capacitor specification | p. 1 |
Where to find it in the PDF
- Parts List and Exploded View p. 1
Table of contents
Important Information
This document serves as the official parts list and exploded view diagram for the Pretul BOPA-1P 1HP peripheral pump. It is intended for identifying specific components and their corresponding part codes for ordering replacements or performing maintenance.
Parts Identification and Ordering
The document provides a detailed breakdown of the pump components. To order replacement parts, use the Código (Code) listed in the table, which corresponds to the numbered items in the exploded view diagram.
You can purchase these parts through authorized TRUPER service centers or by calling 800-018-7873.
Key Components
The pump assembly includes several critical parts, including:
- Impeller: (Impulsor) - Part of the hydraulic system.
- Mechanical Seal: (Sello mecánico) - Essential for preventing leaks.
- Capacitor: (Capacitor 25µF) - Required for motor starting.
- Bearings: (Balero de bolas 6202) - Supports the rotating shaft.
- Electrical Components: Including the power cable, terminal block, and connection cover.
Exploded View Diagram
The diagram illustrates the assembly sequence of the pump. The numbers in the diagram correspond directly to the 'No.' column in the parts table. When disassembling or reassembling the unit, refer to this diagram to ensure all washers, seals, and screws are placed in their correct positions.
Manufacturer information
Pretul
Practical help
Before use
- Verify the model number on your pump matches BOPA-1P.
- Ensure you have the correct part code from the 'Código' column before contacting service centers.
- Check the capacitor specification (25µF) if experiencing motor starting issues.
Specs in practice
- Capacitor 25µF
- Electrical component required for motor operation.
- M6x16, M5x40, etc.
- Metric screw dimensions (Diameter x Length).
Images and diagrams
- The diagram provides an exploded view of the pump assembly.
- Numbers in the diagram correspond to the 'No.' column in the parts table.
- Use the 'Código' column when ordering replacement parts.
Model compatibility
- Parts listed are specific to the Pretul BOPA-1P model.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.