Automotive / Exterior Accessories
User Manual for Rugged Ridge CB Antenna Mount JK
Quick guide for installing the Rugged Ridge CB Antenna Mount JK. Includes step-by-step installation instructions, hardware requirements, torque specifications, and warranty contact information.
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
This document provides installation instructions for the Rugged Ridge CB Antenna Mount JK. Before beginning, ensure you have all necessary tools and parts. The installation requires removing the spare tire and specific factory bolts. The mount features two mounting holes, and either one may be used.
Parts included
- 1 x CB Antenna Mount
- 2 x 8 x 40mm Hex Bolts
- 2 x 8mm Lock Washers
- 2 x 8mm Flat Washers
Installation procedure
- Remove the spare tire from your factory mount.
- Remove the two top right-hand 13mm hex bolts from the spare tire mount.
- Install the CB Antenna Mount using the supplied hex bolts, lock washers, and flat washers.
- Torque the bolts to 10 ft-lbs.
- Remount the spare tire after the antenna installation is complete.
Warranty and support
The product includes a limited warranty. For technical assistance or warranty claims, contact OMIX-ADA Tech Support at 1-800-449-6649 or via email at [email protected]. You can also visit their website at www.Omix-Ada.com.
Official resources from the manual
Practical help
Common problems
Mounting flexibility
The mount has two mounting holes; you may use either one depending on your specific setup.
Before use
- Verify all parts are present (Mount, 2 bolts, 2 lock washers, 2 flat washers)
- Ensure you have a 13mm wrench or socket for the factory bolts
- Have a torque wrench ready to ensure proper tightening
- Ensure the vehicle is parked safely before removing the spare tire
Specs in practice
- Torque specification
- 10 ft-lbs for the hex bolts to ensure secure mounting without damaging the threads.
Images and diagrams
- The installation process involves removing the spare tire to access the factory mount bolts.
- The mount is secured using the top right-hand bolt locations on the spare tire mount.
Model compatibility
- Designed for the JK model spare tire mount.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.