Lighting / Fixtures
User Manual for Scangrip MINI SLIM Rechargeable LED Work Light
Comprehensive user guide for the Scangrip MINI SLIM rechargeable LED work light, covering operation, charging instructions, safety warnings, and maintenance.
Table of contents
Product Overview
The Scangrip MINI SLIM is a compact, high-efficiency rechargeable LED work light designed for versatile illumination. It features a multi-LED design with 16 LEDs, offering both a main light and a spotlight function. The device is built for durability with an IP30 rating and IK07 impact resistance.
Operation
The lamp is controlled via two buttons:
- Power Button (A): Press to turn the lamp on or off. Press and hold to activate the spotlight mode.
- Brightness Button (B): Press to switch to OPTILight mode. Use this button to increase or decrease the brightness level. The lamp saves the last brightness setting and will start at that level the next time it is turned on.
Charging and Battery
The lamp must be fully charged before its first use. Charge the device only indoors at temperatures between 5 °C and 40 °C. During charging, the red indicators will flash, with the highest indicator showing the charging status. When fully charged, all red indicators will remain constantly lit. Avoid leaving the battery discharged for extended periods to prevent damage.
Safety and Maintenance
Do not look directly into the light beam to avoid dazzling. Keep the lamp away from naked flames. The light source is not replaceable; when it reaches the end of its life, the entire lamp must be replaced. If the lamp temperature becomes too high or low, it will automatically turn off and flash all battery indicators 10 times. When the battery level drops below 10%, the lamp will flash 3 times every 2 minutes.
Disposal
Discarded electrical products must not be disposed of with household waste. Please use designated recycling facilities. The battery must be removed from the device before disposal, and the device must be disconnected from the mains during this process.
Manufacturer information
SCANGRIP A/S
Practical help
Common problems
Lamp turns off and battery indicators flash 10 times
The lamp temperature is too high or too low. Allow the lamp to reach a safe operating temperature.
Lamp flashes 3 times every 2 minutes
The battery level is below 10%. Recharge the lamp.
Highest charging indicator does not flash during charging
The ambient temperature is outside the allowed range (5 °C to 40 °C) for charging.
Before use
- Ensure the battery is fully charged before the first use.
- Check that the charging environment is between 5 °C and 40 °C.
- Verify the lamp is disconnected from the charger before use.
- Ensure the light beam is not directed at eyes.
Images and diagrams
- Button (A): Power button for on/off and spotlight activation.
- Button (B): Brightness button for OPTILight mode and intensity adjustment.
Model compatibility
- Use only original batteries for replacement.
- The light source is non-replaceable; the entire unit must be replaced at end-of-life.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.