User Guide for Scangrip NOVA 4 CONNECT Work Light

Quick guide from the manual

The Scangrip NOVA 4 CONNECT is a versatile work light designed for use with Metabo CAS battery systems or other 18V batteries via the Scangrip Connect system. It features integrated Bluetooth control, a built-in USB power bank, and adjustable brightness levels. This document provides essential operating instructions, safety warnings, and technical specifications.

Operation

The lamp is controlled via four buttons (A, B, C, D):

• Button A: Turn the lamp on or off.
• Button B: Increase brightness.
• Button C: Decrease brightness.
• Button D: Enable/disable Bluetooth.

Brightness levels are saved automatically; the lamp will start at the last used level when turned on again.

Bluetooth Light Control

The lamp can be controlled via a mobile app (iOS 10.3+ or Android 5.0+). You can connect up to 4 lamps simultaneously and assign a PIN code to prevent unauthorized control. To reset the PIN code, turn on Bluetooth and press the Bluetooth button for 10 seconds.

Battery and Power

The lamp is compatible with 12V and 18V batteries. If the lamp is disconnected from the mains and the battery is empty, press the power button to activate the internal backup battery (10% LED will blink). When using a Scangrip power supply instead of a battery, the battery cover must be removed.

IP Ratings

The lamp has different IP ratings based on usage:

• IP65: When used with a Scangrip power supply.
• IP54: When the battery cover is mounted and closed.
• IP30: When the battery cover is removed and an external battery is used.

USB Power Outlet

The built-in USB outlet provides 5V/1A output for charging mobile devices. Note that this outlet is disabled when the lamp is in backup mode.

Safety and Maintenance

• Do not look directly into the light beam.
• Protect the mains cable from oil, heat, and sharp edges.
• The internal backup battery must be replaced with an original Scangrip battery.
• Do not leave the battery flat, as it may become impossible to recharge.
• The light source is not replaceable; the entire unit must be replaced at the end of its life.
• Keep a minimum distance of 0.1m from lighted objects to prevent fire risk.