Home Appliances / Vacuum Cleaners
User manual for Sencor SVC 0625AT cordless vacuum cleaner
Complete user guide for the Sencor SVC 0625AT 4-in-1 cordless vacuum cleaner. Learn how to assemble, operate, charge, and maintain your device for optimal performance.
Table of contents
Quick guide from the manual
The Sencor SVC 0625AT is a 4-in-1 cordless vacuum cleaner designed for household use. Before first use, ensure the battery is charged for approximately 6 hours. Always turn off the device before cleaning or placing it in the charging base. Do not vacuum liquids, sharp objects, or construction materials like cement or plaster. Regularly clean the filters and the rotary brush to maintain suction performance.
Description of the vacuum cleaner
The device consists of an upright vacuum cleaner body (A6) with a detachable hand vacuum cleaner (A7). Key components include the floor nozzle with an electric rotary brush (A9), a charging base (A23), and various accessories like the slot nozzle (A21), brush nozzle (A22), and Cat&Dog Mini motorised brush (A25). The mop attachment (G1) allows for simultaneous vacuuming and mopping.
Assembly and disassembly
Hand vacuum cleaner: Insert the internal filter (A12) into the external filter (A13) and turn clockwise to lock. Place the assembled filter into the dust container (A11) and attach it to the motor unit (A18).
Upright vacuum cleaner: Connect the handle (A1) to the body (A6) using the supplied screw, ensuring the connecting cable (A4) is inside. Insert the hand vacuum cleaner (A7) into the body and attach the floor nozzle (A9) to the bottom.
Charging base: Insert the top part of the charging base (A23) into the bottom part. For stability, it can be attached to a wall using screws.
Charging the vacuum cleaner
Place the assembled charging base on a dry, stable surface near a power socket. Connect the power adapter (A24) to the base and the socket. Place the turned-off vacuum cleaner into the base. The LED indicators (A16) will signal the battery level. A full charge takes approximately 6 hours.
Using the vacuum cleaner
Upright mode: Remove from the charging base by pulling upwards. Use button A2 to start and A3 to regulate suction power and brush speed.
Handheld mode: Press button A15 to turn on. Use the slot or brush nozzle for hard-to-reach places or upholstery.
Mop attachment: Attach the mop cover (G4) to the mop attachment (G1). Fill the tank (G2) with water or cleaning solution. Place the vacuum cleaner over the attachment until it clicks into place. The wheels will automatically release water through the panel (G6) while vacuuming.
Maintenance and cleaning
Dust container and filters: Disassemble the hand vacuum, remove the dust container contents, and rinse the container. Wash the external filter (A13) and internal HEPA filter (A12) under running water. Allow all parts to dry completely before reassembly.
Floor nozzle: If the rotary brush is tangled with hair, remove the floor nozzle, release the latch on the left side, and take out the brush to clean it.
Outer surface: Clean with a dry or slightly dampened cloth. Do not use abrasive cleaners or solvents.
Manufacturer information
Sencor
Practical help
Common problems
Vacuum cleaner not charging
Ensure the power adapter is correctly connected to the charging base and the wall socket. Check that the vacuum is properly seated in the base.
Weak suction power
Check if the dust container is full, the filters are clogged, or if the suction opening is blocked by debris.
Rotary brush not spinning
Remove the floor nozzle, open the brush cover, and remove any hair or debris tangled around the brush.
Mop not releasing water
Check if the water tank is filled and if the vacuum is correctly secured to the mop attachment.
Before use
- Ensure the internal and external filters are properly installed.
- Check that the power adapter technical details match your local voltage.
- Ensure the dust container is empty.
- Verify that the air outlets and suction opening are not blocked.
- Charge the battery fully before the first use (approx. 6 hours).
Specs in practice
- Charging time
- Approximately 4-6 hours for a full charge.
- Dust container capacity
- 0.5 liters.
Model compatibility
- Only use the original power adapter and accessories supplied with the device.
- Do not use the vacuum cleaner outdoors or in industrial environments.
- The mop attachment is designed for floor cleaning; do not use on carpets.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.