Installation Instructions for Sigma 143854-75BR 3/4 in. Outlet Box

Important Installation Information

This document provides the necessary steps for installing the Sigma 143854-75BR 3/4 in. all-weather outlet box. This product is designed for electrical wiring applications and must be installed in accordance with the National Electrical Code and all applicable local codes and standards.

Safety Warnings

• Turn off power at the source before beginning any installation work.
• Improper wiring of any electrical device can cause serious injury or death.
• These wiring devices should only be installed by a certified electrician or other qualified person.

Installation Steps

1. Attach the mounting lugs to the box using the provided screws and mount the box to the wall.
2. Pull the supply wires into the box, securing them with an appropriate fitting.
3. Attach the ground wire to the box using the provided green ground screw.
4. Wire and mount the device(s) according to the manufacturer's instructions.
5. Close any remaining holes with the included plugs and use a silicone sealing compound for wet location installations.
6. Mount the cover to the outlet box using the gaskets as required to comply with wet location installation standards.

Components

The package includes the outlet box, plugs, ground screw, and mounting screws. The diagram provided in the manual illustrates the assembly order of the box, gasket, cover, and plugs.