General / Other Manuals
User Manual for SIIG 04-1416A Industrial USB-C Hub and PD Charging Station
Quick guide for the SIIG 04-1416A Industrial USB-C 5Gbps Hub and PD Charging Station. Learn about port layout, charging protocols, and safety instructions.
Table of contents
Manual images
Jump to the sectionQuick guide from the manual
The SIIG 04-1416A is an industrial-grade USB-C hub and charging station designed to charge up to 16 devices simultaneously. It supports 5Gbps data transfer on specific ports and features Power Delivery (PD) 2.0 and 3.0. The unit is rack-mountable and includes built-in protection against over-voltage, short circuits, and over-temperature.
Safety and Notice
- Follow all instructions and warnings marked on the unit.
- Do not attempt to service the unit yourself.
- Ensure proper ventilation and air circulation; do not use near water.
- Place the unit on a stable surface.
- Use only the provided power adapter and power cords.
- Always unplug the device before cleaning; do not use liquid or aerosol cleaners.
Package contents
- Industrial USB-C 5Gbps Hub & PD Charging Station - 600W
- User manual
- USB-C to C cable (x2)
- Power cord
- Mounting Bracket (x2)
Features
- Charging Capacity: Charges up to 16 USB-C devices. Supports 2-port 100W and 14-port 30W charging.
- Data Transfer: 14-port USB-C data port via one system or dual system sharing, supporting up to 5Gbps.
- Power Delivery: Supports PD 2.0 & 3.0 (5V/3A, 9V/3A, 12V/2.5A, 15V/2A, 20V/1.5A).
- Protection: Over-voltage, input under voltage, output short circuit, output over current, and system over-temperature protection.
- Cooling: Automatic fan control based on temperature.
- Compatibility: Compatible with iPhone, iPad, Samsung Galaxy, MacBook, and other USB-C devices.
Layout and Operation
The device features a front panel with specific host and charging ports, and a rear panel for power input.
Front Panel
- Host 1 & Host 2 Parts: These ports provide USB data connection (5Gbps) and PD output power. LED indicators show connection status (Red: device connected, Green: no device connected).
- Charging Ports: All ports support charging even without a data connection.
Rear Panel
- AC Input: 110V, 50Hz/60Hz.
- Power Switch: Used to turn the unit on or off.
Charging Protocols
The device supports the following charging protocols:
- BC1.2, Apple, Samsung
- PD2.0, PD3.0
- Qualcomm QC 2.0, QC3.0
- MTK PE+1.1 and MTK PE+2.0
- Samsung fast charge: AFC
Manufacturer information
SIIG, Inc.
Practical help
Common problems
Device not charging
Ensure you are using the device's original equipment USB-C charging cable or a certified USB-C cable.
No data connection
Verify that the device is connected to the designated Host 1 or Host 2 ports on the front panel.
Before use
- Ensure the device is placed on a stable surface.
- Provide proper ventilation and air circulation around the unit.
- Use only the power adapter and power cords designed for this unit.
- Verify the power switch is in the correct position.
- Ensure all connected cables are certified USB-C cables.
Images and diagrams
- The front panel diagram identifies the Host 1 and Host 2 data/charging ports and their respective LED indicators.
- The rear panel diagram identifies the AC power input and the main power switch.
Model compatibility
- Compatible with Apple iPhone 15/14/13/12/11/X, iPhone 8/8 Plus.
- Compatible with Samsung Galaxy Note 8, S8, S8 Plus.
- Compatible with various Tablets and Laptops including Apple iPad and MacBook series.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.