Lighting / Fixtures
Installation Guide for Tecnolite 23CTLLED1951MV30CRN LED Pendant Lamp
Quick installation and safety guide for the Tecnolite 23CTLLED1951MV30CRN LED pendant lamp. Includes step-by-step wiring instructions, safety precautions, and maintenance tips.
PDF source: español · summary: English
Quick answers from the manual
Quick answer
- The Tecnolite 23CTLLED1951MV30CRN is an indoor LED pendant lamp. Installation requires mounting a bracket, connecting the electrical wires (Line, Ground, Neutral), and securing the fixture. It must be installed at least 0.50m away from combustible materials. p. 1
Key actions
- Install mounting bracket p. 1
- Connect electrical wiring p. 1
Problems and fixes
Fixture overheating
Ensure 0.50m distance from combustible materials.
p. 1Show 3 more answers Show less
Maintenance and reset
- Clean with a dry rag and check connections periodically. p. 1
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Voltage | 100V-240V | Operating voltage range | p. 1 |
| Power | 23W | Power consumption | p. 1 |
Where to find it in the PDF
- Installation and Safety p. 1
- Warranty Information p. 2
Table of contents
Quick guide from the manual
This document provides essential installation and safety instructions for the Tecnolite 23CTLLED1951MV30CRN LED pendant lamp. Always ensure the main power supply is disconnected before beginning any installation or maintenance work.
Safety precautions
- Distance: The luminaire must be installed at a minimum distance of 0.50 meters from any combustible material to avoid fire hazards.
- Power: Always disconnect the power source before installation or maintenance.
- Handling: The lamp and other parts may become hot during use; use a clean rag and gloves when handling.
Installation steps
- Mounting: Drill holes in the ceiling and install the anchors (A-02). Secure the mounting bracket to the ceiling using the provided screws (A-01).
- Wiring: Connect the electrical wires (Line, Ground, Neutral) according to the diagram using the provided connector (A-03). Ensure the ground connection is physical.
- Fixture Attachment: Align the fixture with the mounting bracket and secure it using the provided nuts.
- Final Assembly: Ensure all connections are tight and the fixture is securely attached to the ceiling.
Maintenance
To clean the luminaire and its internal parts, disconnect the power source and use a dry rag. Periodically check all connections to ensure they remain secure.
Technical specifications
- Voltage: 100V-240V, 50/60Hz
- Power: 23W
- Type: LED
Manufacturer information
Tecnolite
Practical help
Common problems
Fixture does not turn on
Verify that the main power supply is on and that all electrical connections (Line, Neutral, Ground) are properly secured.
Fixture gets too hot
Ensure the fixture is installed at least 0.50m away from combustible materials and that the area has adequate ventilation.
Before use
- Turn off the main power supply at the circuit breaker
- Ensure the installation surface is stable and capable of supporting the fixture
- Verify the supply voltage is between 100V and 240V
- Confirm a minimum distance of 0.50m from combustible materials
- Use gloves and a clean rag for handling to prevent burns
Show more Show less
Images and diagrams
- Step 1: Shows drilling and mounting the bracket to the ceiling.
- Step 2: Illustrates the wiring connections (Line, Ground, Neutral) using the connector.
- Step 3: Shows attaching the fixture body to the ceiling bracket.
- Step 4: Shows the final assembled pendant lamp.
Model compatibility
- Designed for indoor use only.
Manual page author
David Miller
Documentation analyst