Lighting / Fixtures
Tecnolite Indoor Light Installation and User Guide
A comprehensive installation and user guide for the Tecnolite indoor light series. Includes step-by-step mounting instructions, electrical wiring diagrams, safety precautions, and warranty details for models 18PTLLEDC30MVB, 18PTLLEDC30MVN...
Quick answers from the manual
Quick answer
- This manual provides installation and maintenance instructions for Tecnolite indoor light models 18PTLLEDC30MVB, 18PTLLEDC30MVN, 18PTLLEDC65MVB, and 18PTLLEDC65MVN. p. 1
Key actions
- Install the mounting bracket to the surface. p. 1
- Connect Line and Neutral wires. p. 1
Maintenance and reset
- Disconnect power and clean with a dry rag. p. 1
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Power | 18W | Power consumption | p. 1 |
| Voltage | 100-240V ~ 50/60Hz | Operating voltage | p. 1 |
Where to find it in the PDF
- Installation and Specifications p. 1
- Warranty Information p. 2
Table of contents
Important Information
This document provides essential installation and safety instructions for the Tecnolite indoor light series. Before beginning any installation, ensure that the power supply is disconnected. The luminaire must be installed at a minimum distance of 0.50m from any combustible material to avoid fire hazards.
Installation Steps
- Prepare the bracket: Remove the mounting bracket from the fixture.
- Mounting: Drill holes in the mounting surface and secure the bracket using appropriate anchors (not included).
- Wiring: Connect the Line and Neutral wires to the fixture's terminal block.
- Final Assembly: Attach the fixture to the mounted bracket and secure it with the provided screws.
Safety and Maintenance
- Always disconnect the power source before performing any maintenance or cleaning.
- Clean the luminaire and its internal parts using a dry rag.
- Do not attempt to modify the product or use it with voltages outside the specified range (100-240V).
Warranty Information
The product is covered by a warranty provided by ILUMINACIÓN ESPECIALIZADA DE OCCIDENTE S.A. de C.V. The warranty period is 5 years for lamps and 2 years for other components, effective from the date of purchase. Please retain your proof of purchase and the stamped warranty card for service claims.
Manufacturer information
Tecnolite
Practical help
Common problems
Light does not turn on
Verify that the power supply is active and that the Line and Neutral wires are correctly connected to the terminal block.
Installation difficulties
Ensure the mounting surface is stable and capable of supporting the fixture. Use appropriate anchors for your specific ceiling or wall type (anchors are not included).
Before use
- Verify the input voltage is between 100-240V ~ 50/60Hz.
- Ensure the power is completely disconnected at the breaker.
- Check that the mounting surface is at least 0.50m away from combustible materials.
- Ensure you have the necessary tools: drill, screwdriver, and appropriate wall anchors.
Images and diagrams
- Step 1: Detach the mounting bracket from the main fixture body.
- Step 2: Secure the bracket to the ceiling/wall using screws and anchors.
- Step 3: Connect the electrical supply wires (Line and Neutral) to the fixture.
- Step 4: Reattach the fixture body to the installed bracket.
Model compatibility
- Designed for indoor use only.
- Not suitable for use with voltages outside the specified range.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.