Lighting / Outdoor Lighting
Installation Manual for Tecnolite 20LQLEDY65MVN Outdoor LED Light
Quick guide for the Tecnolite 20LQLEDY65MVN outdoor LED light. Includes installation steps, electrical connection diagrams, safety precautions, and maintenance tips.
Quick answers from the manual
Quick answer
- The Tecnolite 20LQLEDY65MVN is an outdoor LED light requiring a 100-240V power supply. It must be installed with a physical ground connection and kept at least 0.5m away from combustible materials. p. 1
Key actions
- Mount the luminaire using appropriate anchors and screws. p. 1
- Connect the electrical wires (Line, Ground, Neutral). p. 1
Problems and fixes
Water accumulation
Ensure the fixture is mounted in the correct orientation as shown in the manual.
p. 1Maintenance and reset
- Clean the luminaire and its internal parts using a dry rag and check connections periodically. p. 1
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Power | 20W | Power consumption | p. 1 |
| Voltage | 100-240V | Operating voltage | p. 1 |
Where to find it in the PDF
- Installation and Technical Specifications p. 1
- Warranty Information p. 2
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
This document provides essential installation and maintenance instructions for the Tecnolite 20LQLEDY65MVN outdoor LED light. It covers mounting procedures, electrical wiring, and safety requirements to ensure proper operation.
Installation
The luminaire must be installed by a qualified person. Ensure you have the appropriate anchors and screws for your mounting surface, as these are not included with the product.
- Mount the fixture securely to the wall or surface.
- Ensure the light is positioned at least 0.5 meters away from any combustible material to avoid fire hazards.
- Follow the orientation guidelines to prevent water accumulation inside the fixture.
Electrical connection
Before starting, disconnect the power source. The installation requires a physical ground connection.
- Connect the wires according to the diagram: Line, Neutral, and Ground.
- Ensure all connections are secure and properly insulated.
Maintenance
To maintain the luminaire:
- Disconnect the power source before performing any maintenance.
- Clean the luminaire and its internal parts using a dry rag.
- Wear gloves when handling the luminaire, as parts may become hot during operation.
- Periodically check all connections.
Technical specifications
- Power: 20W
- Voltage: 100-240V, 50/60Hz
- Protection: IP66 (dust-tight and protected against heavy seas/water jets)
- IK Rating: IK05
Manufacturer information
Tecnolite
Practical help
Common problems
Light does not turn on
Check electrical connections and ensure the power source is active.
Water ingress or damage
Ensure the light is mounted in an approved orientation (not facing upwards) to prevent water accumulation.
Before use
- Verify the power supply is 100-240V, 50/60Hz.
- Ensure you have appropriate anchors and screws for the mounting surface (not included).
- Check that the installation site is at least 0.5m away from combustible materials.
- Ensure a physical ground connection is available.
Images and diagrams
- The installation diagram shows the mounting process using anchors and screws.
- The electrical diagram illustrates the connection of Line, Neutral, and Ground wires.
- The orientation diagram highlights correct and incorrect mounting positions to prevent water damage.
Model compatibility
- Not suitable for constant voltage work outside the specified levels.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.