Lighting / Fixtures
User Manual for Tecnolite 12FTLLED014MV30N LED Pendant Lamp
Quick guide for the Tecnolite 12FTLLED014MV30N LED pendant lamp. Includes installation steps, technical specifications, safety warnings, and maintenance instructions.
Table of contents
Quick Guide
This document provides essential installation and safety instructions for the Tecnolite 12FTLLED014MV30N LED pendant lamp. Before beginning, ensure the power supply is disconnected. The fixture is designed for outdoor use and requires a physical ground connection for safe operation.
Safety Precautions
- Distance: The fixture must be installed at least 0.50 m away from any combustible material to avoid fire hazards.
- Power: Always disconnect the power source before installation or maintenance.
- Grounding: The ground connection must be physical.
- Handling: The lamp and its internal parts may heat up during operation; use a clean rag or gloves when handling the fixture.
Installation
- Mounting the Base: Secure the mounting base to the ceiling using the provided screws.
- Drilling and Anchoring: Drill holes as required, insert anchors (A-02), and secure the base plate using washers (A-03) and screws (A-01).
- Wiring: Connect the electrical wires (Line, Ground, Neutral) according to the diagram. Ensure the ground connection is physical. Use the provided wire connectors (A-04) and insulating tube (A-05).
- Final Assembly: Complete the installation by attaching the pendant lamp to the mounted base.
Technical Specifications
- Voltage: 100-240 V ~ 50/60 Hz
- Power: 12 W
- Current: 0.12 A - 0.05 A
- Protection Rating: IP54 (Dust and splash-proof)
- Impact Rating: IK07
Maintenance
To maintain the fixture, disconnect the power source. Clean the luminaire and its internal parts with a dry rag. Periodically check all connections to ensure they remain secure.
Parts List
- A-01: Screw (x3)
- A-02: Anchor (x3)
- A-03: Washer (x3)
- A-04: Quick connector (x3)
- A-05: Insulating tube (x1)
- A-06: Allen key (x1)
Manufacturer information
Tecnolite
Practical help
Common problems
Fixture overheating
Ensure the fixture is installed at least 0.50 m away from any combustible material.
Electrical connection issues
Verify that the ground connection is physical and properly connected according to the wiring diagram.
Before use
- Ensure the power supply is disconnected before starting installation.
- Verify the installation surface can support the fixture.
- Check that the ground connection is physical.
- Ensure you have the necessary tools: drill, screwdriver, and protective gloves.
- Confirm the installation location is at least 0.50 m away from combustible materials.
Images and diagrams
- Step 1: Mounting the base to the ceiling.
- Step 2: Drilling holes and securing the base plate with anchors and screws.
- Step 3: Wiring connections showing Line, Ground, and Neutral.
- Step 4: Final assembly of the pendant lamp.
Model compatibility
- Suitable for outdoor use.
- Requires a physical ground connection.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.