Lighting / Fixtures
Tecnolite 11YDLED432MV LED Downlight Instruction Manual
Quick guide for the Tecnolite 11YDLED432MV LED downlight, covering installation steps, safety requirements, electrical connection, and technical specifications.
Table of contents
Manual images
Jump to the sectionQuick guide from the manual
This document provides essential installation and safety instructions for the Tecnolite 11YDLED432MV LED downlight. It is intended for indoor use only. Ensure you follow all electrical safety protocols and maintain the required clearance for proper ventilation to prevent fire hazards.
Safety and installation requirements
- Indoor use only: This fixture is designed exclusively for interior lighting.
- Clearance: Maintain a minimum space of 25 cm around the fixture for proper ventilation.
- Distance from combustible materials: The fixture must be installed at least 0.50 m away from any combustible material.
- Electrical safety: Always disconnect the power source before starting any installation or maintenance work.
Installation steps
- Preparation: Prepare a ceiling cutout with a minimum diameter of 115 mm. Ensure the area has at least 25 cm of ventilation space.
- Wiring: Connect the fixture to the power supply (Line and Neutral). Ensure all connections are secure.
- Mounting: Attach the anchoring clips (A-01) to the fixture.
- Final assembly: Insert the fixture into the ceiling cutout. The fixture requires a minimum height clearance of 8 cm (suggested integral pot size).
Maintenance
To maintain the fixture, disconnect the power supply. Clean the luminaire and its internal parts periodically using a dry rag. Wear gloves when handling the fixture if it has been recently in use, as it may be hot.
Technical specifications
- Power supply: 100 V - 240 V, 50/60 Hz
- Power consumption: 11 W
- Current: 0.11 A - 0.05 A
- Lamp type: LED
Manufacturer information
Tecnolite
Practical help
Common problems
Fixture is hot to the touch
The lamp and other parts can heat up during operation. Allow the fixture to cool down before performing any maintenance and use gloves.
Risk of fire
Ensure a minimum clearance of 0.50 m from combustible materials and 25 cm for ventilation.
Before use
- Verify the power supply is 100-240V.
- Ensure the ceiling cutout is at least 115 mm in diameter.
- Check that there is at least 8 cm of height clearance behind the ceiling.
- Confirm the power is disconnected at the main breaker.
- Have a dry cloth and gloves ready for installation.
Images and diagrams
- Step 1 shows the required ceiling cutout and ventilation clearance.
- Step 2 illustrates the electrical connection to Line and Neutral.
- Step 3 demonstrates how to attach the anchoring clips and insert the fixture.
- Step 4 shows the final installation dimensions and height requirements.
Model compatibility
- Designed for indoor use only.
- Not suitable for work with voltages higher than those specified on the product label.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.