Electric Wine Aerator User Manual

Quick Guide

This electric wine aerator is designed to aerate and pour wine directly from the bottle. Before using it for the first time, ensure the device is fully charged using the included USB cable and rinse the exterior and pour spout with clean water. Do not submerge the main body unit in water.

Operating Instructions

Charging: Connect the provided USB cable to the charging port on the aerator and a standard USB power adapter (5V, 1A recommended). A full charge typically takes 2-3 hours. The indicator light displays the charging status.

Attachment: Insert the silicone stopper securely into the opening of a standard wine bottle. Ensure a tight fit to prevent leaks.

Aeration and Pouring: Hold the bottle at a comfortable angle over a glass. Press and hold the operation button to pour wine through the aerator. Release the button to stop the flow.

Preservation Mode: When not actively pouring, the aerator remains sealed in the bottle to help preserve the wine's freshness for a short period.

Cleaning and Maintenance

Self-Cleaning Function: After use, fill a glass with clean water. Submerge only the pour spout into the water. Press and hold the operation button to pump water through the internal tubes for 15-20 seconds or until the water runs clear.

Exterior Wipe: Wipe the main body with a soft, damp cloth. Do not use abrasive cleaners.

Decalcification: If mineral buildup occurs (common in hard water areas), run a mixture of half water and half white vinegar through the system using the self-cleaning function, followed by several cycles of clean water.

Drying and Storage: Shake off excess water and allow the aerator to air dry completely before storing. Disconnect from the bottle and store in a clean, dry place to prevent mold or mildew.

Troubleshooting

If you encounter issues, check the following:

• Device does not turn on: Ensure the battery is charged by connecting it to a USB power source.
• Wine flows slowly or not at all: Check that the button is fully pressed. Ensure the bottle opening and aerator stopper are clean and free of debris. If the bottle is vacuum-sealed, break the seal first.
• Minor leaking: Confirm the silicone stopper is fully and evenly inserted into the bottle neck.
• Unusual noise: Check for obstructions in the spout. Ensure the device is properly attached and the bottle is not tilted excessively.

Safety Precautions

• This is an electrical appliance; do not immerse the main body, charging port, or button in water or other liquids.
• Use only with the provided or a standard USB charging cable (5V DC).
• Use only for its intended purpose with wine. Do not use with corrosive or flammable liquids.
• Keep out of reach of children.
• Unplug from charging once the battery is full.
• Do not attempt to disassemble or repair the device.