Lighting / Fixtures
1-Light Wall Sconce Installation Guide
Quick installation guide for the 1-Light Wall Sconce. Includes step-by-step mounting instructions, safety precautions, and compatibility notes for dimming and light sources.
Table of contents
Important Installation Information
Before beginning the installation of your wall sconce, please review the following requirements to ensure safety and proper setup:
- Power Safety: Ensure the power is completely turned off at the fuse box before starting any work.
- Professional Installation: It is recommended to have the fixture installed by a qualified licensed electrician.
- Preparation: Prepare all components in a clear area and wear gloves throughout the installation process to protect the finish.
- Reference: Keep this instruction sheet for future reference.
Installation Steps
- Fix the base (2a) to the wall.
- Secure the base using the screw (1c) and part (1d).
- Connect the base with part (1d) and secure it with the screw (1b).
- Fix the lampshade tightly using the lamp holder ring.
- Install a GU10 light source (not included).
- Once installation is complete, power can be turned on.
Compatibility and Notes
Please note the following specifications for your fixture:
- Light Source: The product does not contain a light source. It requires a GU10 bulb.
- Dimming: If you wish to use a dimmer, an ELV (Electronic Low Voltage) type dimmer is required.
- Maintenance: When replacing the light source, ensure the switch is turned off.
Manufacturer information
The Home Depot
Practical help
Common problems
Dimming not working
Ensure you are using an ELV (Electronic Low Voltage) type dimmer, as standard dimmers may not be compatible.
Light source missing
The product does not include a light source; you must purchase a GU10 bulb separately.
Before use
- Ensure power is completely off at the fuse box
- Prepare a clear workspace for assembly
- Wear gloves during installation
- Verify you have a compatible GU10 light source
Specs in practice
- Light Source
- Requires a GU10 bulb (not included)
Images and diagrams
- The installation diagram illustrates the assembly of the base, including the wall bracket, screws, and the lamp holder ring.
Model compatibility
- Requires GU10 bulb
- Requires ELV dimmer for dimming functionality
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.