Lighting / Fixtures
Assembly Instructions for Lark Manor Elysian 1-shelf Coffee Table
Quick assembly guide for the Lark Manor Elysian 1-shelf glass top coffee table. Includes parts list, hardware identification, and step-by-step installation instructions.
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
The assembly of this coffee table is designed to be quick, with an estimated assembly time of 5 minutes. Before starting, ensure all hardware and parts are present. Sort the hardware by size to facilitate the process. Follow the numbered sequence in the instructions to ensure a fast and easy assembly.
Warning: This product is intended for home use only and is not suitable for commercial establishments. Do not attempt to repair or modify parts that are broken or defective; contact the store immediately.
Parts identification
- AV: Top (1PC)
- BV: Glass (1PC)
- CV: Metal Leg (4PCS)
- DV: Shelf (1PC)
- EV: Base (1PC)
Hardware identification
- 1: Short Bolt (M6 x 20mm - RBW) - 16PCS
- 2: Small Lock Washer (M6 - RBW) - 16PCS
- 3: Small Flat Washer (M6 - RBW) - 16PCS
- 4: Long Bolt (M8 x 25mm - RBW) - 4PCS
- 5: Big Lock Washer (M8 - RBW) - 4PCS
- 6: Big Flat Washer (M8 - RBW) - 4PCS
- 7: Leveler - 4PCS
- 8: Allen Wrench (M4 - BLK) - 1PC
Assembly steps
Step 1: Attach the metal legs (CV) to the top (AV) using the short bolts (1), small lock washers (2), and small flat washers (3). Tighten with the Allen wrench (8).
Step 2: Attach the shelf (DV) to the legs.
Step 3: Attach the base (EV) to the legs using the long bolts (4), big lock washers (5), big flat washers (6), and levelers (7).
Step 4: Place the glass top (BV) onto the assembled frame.
Step 5: The assembly is complete.
Dimensions
The table measures 52.25 inches in length. Refer to the dimension diagram for detailed height and width specifications. Note that there is a dimension tolerance of ±5%.
Manufacturer information
Wayfair LLC
Practical help
Common problems
Broken or defective parts
Do not attempt to repair or modify. Contact the store immediately.
Missing hardware or parts
Check all contents against the parts and hardware identification lists before starting assembly.
Before use
- Remove all hardware from the box.
- Sort hardware by size.
- Verify all parts are present against the identification list.
- Ensure you have the included Allen wrench.
- Clear a workspace for assembly.
Specs in practice
- M6 x 20mm Bolt
- Short bolt used for attaching legs to the top.
- M8 x 25mm Bolt
- Long bolt used for attaching the base.
- Dimension tolerance ±5%
- The actual product dimensions may vary by up to 5% from the stated measurements.
Images and diagrams
- The manual provides exploded views for each assembly step.
- Hardware is numbered 1-8 for easy identification in the diagrams.
- Parts are labeled AV-EV for clear assembly reference.
Model compatibility
- Intended for home use only.
- Not suitable for commercial establishments.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.