ADEO Chain Sling User Manual

Quick guide from the manual

This document provides essential safety and operational guidelines for ADEO chain slings. Always verify the specific model and its Working Load Limit (WLL) before use. The chain sling must be used flexibly; forced use when connections are inflexible is strictly prohibited.

Safety instructions

• Do not exceed WLL (Working Load Limit): The chain sling is not approved for overhead lifting.
• Pre-use inspection: Check the overall condition of the product before each use. Look for widened hook openings, deformation, or cracks.
• Damaged equipment: Do not use the chain sling if it is damaged. If the chain does not work properly, consult a qualified technician.
• Safe operation: No one is allowed to stand below when hoisting goods.

Inspection procedures

• Before each use: Perform a visual inspection to determine if there are abnormal conditions such as cracking, bending, or deformation.
• After each use: If the chain sling is strained abnormally, have it checked immediately by the manufacturer or authorized maintenance personnel.

How to use the chain sling

1. The crane hooks up the lifting ring.
2. The hook of the chain sling hooks the goods at four corners.
3. Ensure the chain is not twisted or knotted.
4. Ensure the weight is evenly distributed on each chain.
5. Lift slowly; do not let the goods tilt.
6. Ensure the angle between the chain and the goods complies with safety rules: θ > 40° is recommended; 20° < θ < 40° bears only half the WLL; θ < 20° is strictly prohibited and unsafe.
7. Use the adjusting hooks at the top of each leg for precise chain length adjustment.

Maintenance

• Clean and dry the product after use.
• Store in a dry, ventilated place to prevent rusting.