User Manual for Amica 2022C(GX)3.334eEHTsDHbScX Electric Oven and Hob
Comprehensive user guide for the Amica 2022C(GX)3.334eEHTsDHbScX electric oven and ceramic hob. Includes installation instructions, operation, maintenance, and troubleshooting.
PDF source: CS · summary: English
Quick answers from the manual
Quick answer
- This manual provides instructions for the Amica 2022C(GX)3.334eEHTsDHbScX electric oven and ceramic hob, covering installation, operation, maintenance, and troubleshooting. p. 1, 41
Key actions
- Set the current time on the programmer after power connection. p. 22, 61
- Heat the oven to 250°C for 30 minutes before first use. p. 19, 58
First start
- Remove packaging, clean the interior, and run the oven at 250°C for 30 minutes. p. 19, 58
Show 4 more answers Show less
Problems and fixes
Check the home fuse.
p. 39, 78Set the current time.
p. 39, 78Maintenance and reset
- Clean the oven using the Steam Clean function. p. 35, 74
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Nominal power | 10.3 kW | Maximum power consumption | p. 40, 79 |
Where to find it in the PDF
- Installation p. 12, 51
- Operation p. 19, 57
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
This appliance is designed for household use. Before first use, ensure the oven is clean and run it at 250°C for approximately 30 minutes to remove factory preservatives. Always set the current time on the programmer after connecting to power, as the oven will not operate otherwise. Keep children away from the appliance during use as surfaces become hot.
Installation
The appliance must be installed by a qualified professional. Ensure the kitchen is well-ventilated. The worktop must be 28-40 mm thick and heat-resistant up to 100°C. Follow the specific cutout dimensions provided in the manual (560x490 mm). Electrical connection must be performed according to the provided wiring diagrams (1N~, 2N~, or 3N~).



Operation
The hob is controlled by knobs that allow for variable heat settings. The oven features multiple functions including rapid heat, defrost, grill, and various heating modes (top/bottom, fan-assisted). The electronic programmer allows you to set the current time, a timer, and automatic start/stop times for cooking.
Cleaning and Maintenance
Clean the hob after every use. Use a special scraper for stubborn stains. The oven features a 'Steam Clean' function: pour 0.25L of water into a dish on the bottom level, set the oven to 50°C and bottom heat for 30 minutes, then wipe clean. The oven door and inner glass panes can be removed for thorough cleaning.


Troubleshooting
If the appliance does not work, check the home fuse. If the programmer display shows 0.00, reset the time. If the oven light fails, replace the G9 230V 25W bulb.
Manufacturer information
Amica S.A.
Practical help
Common problems
Check the main fuse in your home installation.
The device was disconnected from power; set the current time.
Tighten or replace the bulb (G9, 230V, 25W).
Before use
- Remove all packaging and labels.
- Clean the oven interior and hob surface.
- Heat the oven to 250°C for 30 minutes to remove factory preservatives.
- Set the current time on the programmer.
Show more Show less
Specs in practice
- Nominal voltage
- 230/400V~50 Hz
- Nominal power
- max. 10.3 kW
Images and diagrams
- Installation cutout dimensions (560x490mm).
- Electrical connection diagrams for 1N~, 2N~, and 3N~.
Model compatibility
- Use cookware suitable for ceramic hobs.
- Do not use pots with rough or sharp bottoms.
Manual page author
Emily Carter
User documentation editor