User Manual for Anko 1.82M Christmas Tree

Quick guide from the manual

This document provides instructions for the assembly, maintenance, and storage of the Anko 1.82M (6FT) Snowy Pine Christmas Tree (Model 43307876). Ensure all parts are present before beginning assembly.

Contents

• Tree Top (Section A)
• Upper body (Section B)
• Lower body (Section C)
• Plastic stand

Assembly Instructions

1. Slide the tree legs upwards into the slots of the base trunk (Section A) until firmly secure.
2. Insert Section B into Section C, then secure the assembly into the stand.
3. Insert Section A into Section B.
4. Lower all main branches on the bottom level and position them parallel to the floor. Shape as desired.
5. For a better result, straighten and separate all small branches. Bend them slightly upward in a 'V' shape to match the rest of the tree.

Safety Warnings

• This product is for indoor use only.
• Keep the product away from fire and other heat sources.
• Retain these instructions for future reference.

Packaging Up and Storage Tips

• Remove all lights and ornaments before disassembly.
• Remove sections in reverse order (Section A, then Section B).
• Slide legs down and remove from the slots at the base of the tree trunk.
• Press branches against the stem for each section before placing them in the carton.
• Pack the carton and store it in a dry, damp-free area.
• Do not place the product in direct sunlight or in areas where temperatures exceed 40 degrees.