User Manual for Apple 140W USB-C Power Adapter

Quick guide from the manual

To charge your device using the Apple 140W USB-C Power Adapter, follow these steps:

1. Connect a USB-C cable (not included) to the power adapter.
2. Extend the electrical prongs if necessary.
3. Plug the power adapter firmly into a power outlet. Ensure the outlet is easily accessible for disconnecting.
4. Connect the other end of the cable to your device.

Safety information

The power adapter may become warm during normal use. It complies with user-accessible surface temperature limits, but sustained contact with warm surfaces for long periods may cause discomfort or injury. To reduce the risk of overheating:

• Always allow adequate ventilation around the adapter.
• Do not place the adapter under a blanket, pillow, or your body while it is connected to a power source.
• Avoid situations where your skin is in prolonged contact with the adapter while it is plugged in (e.g., do not sleep with the adapter).
• Use extra caution if you have a physical condition that affects your ability to detect heat.

Do not use the adapter in wet locations, such as near a sink, bathtub, or shower, and do not connect or disconnect it with wet hands.

When to unplug the adapter

Disconnect the power adapter from the power source if any of the following conditions occur:

• The USB-C cable or power cord is frayed or damaged.
• The plug, prongs, or adapter case is damaged.
• The adapter has been exposed to rain, liquid, or excessive moisture.
• You suspect the adapter needs service or repair.
• You intend to clean the adapter.

Technical specifications

Input: 100-240VAC / 2.0A

Output (USB PD): 5.2VDC/3A, 9VDC/3A, 15VDC/5A, 20.5VDC/5A, or 28VDC/5A