Computers / Laptops
AVer USB 3.1 High Speed Active Optical Cable
Quick user guide for AVer USB 3.1 Active Optical Cables (10m, 20m, 30m), covering installation, connection diagrams, and power requirements for AVer cameras.
Table of contents
Product Overview
The AVer USB 3.1 High Speed Active Optical Cable is a high-performance extension solution designed for professional connectivity. Available in 10m, 20m, and 30m lengths, it utilizes reinforced fiber technology to provide superior signal quality compared to traditional copper cables. It supports data rates up to 5Gbps and is ideal for extending the reach of USB devices, such as AVer cameras, without signal degradation.
Key Features
- Reinforced Fiber Construction: Offers a softer, slimmer, and more durable design than standard copper cables.
- High Performance: Supports USB 3.1 speeds up to 5Gbps with anti-jamming capabilities.
- Plug-and-Play: Supports hot-plugging and requires no additional drivers for operation.
- Flexible Power Options: Designed to operate without external power in most scenarios.
Safety and Handling
To ensure the longevity of the cable and prevent damage, please observe the following precautions:
- Keep the product away from liquids to avoid electric shock and short circuits.
- Avoid applying excessive force, bending, or pulling the cable, as this may damage the internal fiber optics.
- Do not drop, hit, or subject the cable to heavy loads or vibrations.
- Ensure all connections are made properly to prevent operational issues.
Installation and Connections
To install the cable, connect the USB 3.1 Type A plug directly to the USB 3.1 port on your laptop or PC. Connect the female Type A end of the optical cable to the USB cable of your camera. Note that the system does not support USB 2.0 on the PC side.
Power Requirements
In most cases, the cable is powered directly by the host device. If you experience a power supply shortage, you can provide additional power via the Micro B receptacle on the cable. When using AVer cameras, a direct connection is usually sufficient as power consumption is typically under 2W. However, specific models like the CAM540 require an external power source connected to the Micro B port.
Contact Information
For further assistance, contact AVer Information Inc. at 8F, No.157, Da-An Rd., Tucheng Dist., New Taipei City, Taiwan, or visit their website at www.aver.com. Telephone: +886-2-2269-8535.
Official resources from the manual
Manufacturer information
AVer Information Inc.
Practical help
Common problems
Power supply shortage
Connect an external power source to the Micro B receptacle on the cable.
CAM540 camera not functioning
The CAM540 requires an external power connection to the Micro B port.
Connection failure
Ensure the host port is a USB 3.1 port; the cable does not support USB 2.0 on the PC side.
Before use
- Verify the host computer has a USB 3.1 port.
- Inspect the cable for any physical damage or sharp bends.
- Ensure the camera is compatible with the USB 3.1 standard.
- Check if the specific camera model requires external power via the Micro B port.
Specs in practice
- Cable Lengths
- Available in 10m, 20m, and 30m variants.
- Power Consumption
- Standard operation is under 2W; external power is optional unless specified by the device.
Model compatibility
- Does not support USB 2.0 on the PC side.
- Compatible with AVer cameras; check specific model requirements for external power.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.