Lighting / Fixtures
BEGA 84087 Garden In-Grade Luminaire Specification Sheet
Quick guide and technical specifications for the BEGA 84087 12V AC garden in-grade luminaire. Learn about installation requirements, electrical parameters, and usage limitations.
Table of contents
Important Information
The BEGA 84087 is a low-voltage in-grade floodlight designed for landscape accent lighting. Crucial usage limitations: This luminaire is intended for installation in flower beds, lawns, or gravel areas with foot traffic only. It is not to be installed in concrete or in areas subject to vehicular traffic. Operation requires a low-voltage magnetic transformer.
Product Overview
This luminaire is constructed with a composite housing, clear safety glass, and corrosion-resistant 304-grade stainless steel. It features a fully potted waterstopper cable and a pure anodized aluminum reflector surface. The unit is NRTL listed for North American standards and is suitable for wet locations with an IP 67 protection rating.
Technical Specifications
- Operating Voltage: 12V AC
- LED Module Wattage: 4.2 W
- System Wattage: 5.36 W
- Luminaire Lumens: 623 lm
- Color Rendering Index (CRI): Ra > 80
- LED Service Life (L70): 60,000 hours
- Controllability: Non-Dimming
- Operating Temperature: Minimum -40°C, Maximum 25°C
Installation and Compatibility
The luminaire requires a low-voltage magnetic transformer for operation. It is compatible with the BEGA B536 low-voltage magnetic transformer (300W). Ensure all electrical connections are made according to local codes and the requirements of the transformer used.
Maintenance
BEGA provides suitable LED replacement modules for up to 20 years after the purchase of the luminaire. For specific replacement procedures or to order parts, please refer to the official BEGA website.
Manufacturer information
BEGA
Practical help
Common problems
Luminaire does not turn on
Ensure a low-voltage magnetic transformer is connected and providing 12V AC power.
Installation in concrete
This luminaire is not designed for installation in concrete; it is intended for soil, gravel, or lawn installation.
Damage from vehicles
Do not install in areas with vehicular traffic; the luminaire is designed for foot traffic only.
Before use
- Verify the power source is a 12V AC low-voltage magnetic transformer.
- Ensure the installation site is soil, flower bed, lawn, or gravel.
- Confirm the area is free from vehicular traffic.
- Check that the installation surface is not concrete.
- Ensure the ambient temperature does not exceed 25°C.
Images and diagrams
- The diagram provides physical dimensions (A, B, C) for the luminaire to assist with planning the installation site.
Model compatibility
- Compatible with BEGA B536 low-voltage magnetic transformer (300W).
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.