Belltech 153201HKP 4-inch Lift Kit Parts List

Quick guide to the Belltech 153201HKP parts list

This document serves as the official parts inventory for the Belltech 4-inch lift kit, specifically designed for 2007-2017 Jeep JK 4WD vehicles. Before beginning any installation, use this guide to verify that all necessary suspension components and hardware are included in your package.

Kit components inventory

The 153201HKP kit includes the following major suspension and hardware components:

• Front Suspension: Street performance shocks (2), coil springs (2), upper control arms (2), lower control arms (2), swaybar endlinks (4), adjustable track bar (1), SS brake line set (1), and brake line brackets (2).
• Rear Suspension: Street performance shocks (2), coil springs (2), upper control arms (2), lower control arms (2), adjustable trackbar (1), coil spring correction plates (2), and SS brake line set (1).
• Exhaust Extension Kit: Includes long extension (1), short extension (1), M8x1.25-90mm bolts (4), and M8 washers (4).
• Hardware Kit: Includes screw-in cable holders (4) and M6x1.0-10mm flange bolts (4).

Pre-installation verification

It is critical to perform a full inventory check before disassembling your vehicle. Ensure that all items listed above are present and undamaged. If any components are missing or damaged, contact your supplier or Belltech support immediately before attempting installation.