Automotive / Parts & Accessories
Installation Manual for BMW 3 Series Pedal Cover Set
Quick installation guide for BMW 3 Series stainless steel pedal covers. Includes step-by-step instructions, compatibility details, and safety notes for a secure fit.
Table of contents
Manual images
Click an image to enlargeQuick Installation Guide
This guide provides instructions for installing the stainless steel pedal cover set on BMW 3 Series vehicles. The installation is non-destructive and requires no special tools.
Compatibility
This product is designed for the following BMW 3 Series models produced between 2013 and 2019:
- F30
- F31
- F34
- F35
The package is available in 2-piece (Brake + Accelerator) or 3-piece (Brake + Accelerator + Footrest) configurations.
Installation Steps
- Clean: Thoroughly clean the surface of the original pedals to remove all dust, dirt, and oil.
- Align: Position the new pedal cover over the original pedal.
- Secure: Press the cover firmly onto the pedal until it fits securely.
- Adjust: For the brake pedal, ensure the rubber edge is stretched and pressed completely around the pedal to lock it in place.
- Verify: Check the stability of the covers before driving the vehicle.
Safety Notes
- Ensure the pedal covers are firmly installed and do not slip before operating the vehicle.
- Regularly inspect the pedal surface to ensure the covers remain properly fitted.
- Never attempt to install the covers while the vehicle is in motion or the engine is running.
- If you are unsure about the installation process, professional assistance is recommended.
Manufacturer information
BMW
Practical help
Common problems
Cover feels loose or unstable
Ensure the rubber backing is fully stretched and seated around the edges of the original pedal.
Cover does not stay in place
Clean the original pedal surface thoroughly with a degreaser to remove oil or residue that prevents the rubber from gripping.
Before use
- Verify vehicle compatibility (BMW 3 Series 2013–2019, F30/F31/F34/F35).
- Ensure the vehicle is parked on a flat surface with the engine off.
- Clean the original pedal surfaces of all dust and oil.
- Check that the rubber edges of the new covers are intact.
- Test the stability of the covers by hand before driving.
Specs in practice
- Installation Type
- Non-destructive, slip-on installation; no drilling or screws required.
Images and diagrams
- The installation process involves placing the cover over the existing pedal and securing the rubber edges around the back of the pedal.
Model compatibility
- Compatible with BMW 3 Series models (F30, F31, F34, F35) from 2013 to 2019.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.