Automotive / Parts & Accessories
Installation Guide for BMW 3 Series Stainless Steel Pedal Cover Set
A quick installation guide for BMW 3 Series (F30, F31, F34, F35) stainless steel pedal covers. Includes step-by-step instructions for 2-piece and 3-piece sets, safety precautions, and maintenance tips.
Table of contents
Manual images
Click an image to enlargeQuick Guide from the Manual
This guide covers the installation of stainless steel pedal covers for BMW 3 Series vehicles. The installation is non-destructive and involves fitting the covers directly over the existing pedals. Ensure the vehicle is turned off before starting the installation.
Product Overview
The pedal cover set is designed for BMW 3 Series models from 2013 to 2019 (F30, F31, F34, F35). The set is available in two configurations:
- 2-piece set: Includes Brake and Accelerator pedals.
- 3-piece set: Includes Brake, Accelerator, and Footrest pedals.
The covers are made of stainless steel with anti-slip rubber backing for durability and safety.
Installation Steps
- Clean: Thoroughly clean the surface of the original pedals to remove all dust, dirt, and oil.
- Align: Position the new pedal cover over the original pedal.
- Secure: Press the cover firmly onto the pedal until it fits securely.
- Brake Pedal Adjustment: For the brake pedal, carefully stretch the rubber edge and press it around the pedal to ensure a snug fit.
- Verify: Check the stability of all covers before driving the vehicle.
Safety Notes
- Ensure all pedal covers are firmly installed and do not slip before operating the vehicle.
- Regularly check the pedal surface to ensure the covers remain properly fitted.
- Do not attempt to install the covers while the vehicle is running.
- If you are unsure about the installation process, professional assistance is recommended.
Manufacturer information
BMW
Practical help
Common problems
Pedal cover feels loose or unstable
Ensure the rubber edge is fully stretched and seated around the entire perimeter of the pedal.
Difficulty fitting the brake pedal cover
The brake pedal cover requires stretching the rubber backing. Ensure the rubber edge is pulled over the pedal lip completely.
Before use
- Clean the original pedal surface thoroughly to remove oil and dust
- Verify the vehicle is turned off
- Confirm you have the correct set (2-piece or 3-piece)
- Check that the rubber backing is intact
- Test the stability of the covers after installation
Specs in practice
- Compatibility
- Fits BMW 3 Series models F30, F31, F34, and F35 (2013–2019).
Images and diagrams
- The installation is a direct, non-destructive fit over existing pedals.
- The brake pedal cover requires stretching the rubber edge to secure it.
Model compatibility
- Compatible with 2013-2019 BMW 3 Series models.
- Available in 2-piece (Brake + Accelerator) or 3-piece (Brake + Accelerator + Footrest) configurations.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.