Electronics / Networking
Cisco Business 145AC Access Point Quick Start Guide
Quick start guide for the Cisco Business 145AC Access Point. Includes setup instructions, hardware requirements, LED status indicators, and configuration steps for new or existing networks.
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
This guide provides the essential steps to set up your Cisco Business 145AC Access Point. Ensure you have a PoE-capable network switch or injector before beginning. The device requires an active internet connection and a DHCP-enabled router. During the initial boot process, the LED will cycle through green, amber, and red; this is normal and can take up to 6 minutes. The device is ready for configuration once the LED is blinking or solid green.
What's in the box
- Cisco Business 145AC Access Point
- Mounting Kit
- Ethernet Cable
- Quick Start Guide
- Technical Support Contact List
- Pointer Card China RoHS
- Compliance Information (for EU SKU only)
Product features
- Pass-Thru Port
- LAN3
- Status LED
- LAN2
- PSE-LAN1
- Mode Button
- PoE (Power over Ethernet)-In Port (Ethernet Uplink Port)
- Kensington Lock (Located on the side)
Requirements
- An active Internet connection
- A phone or tablet with Wi-Fi capability (not connected to an active wireless network)
- A PoE (Power over Ethernet) switch, router or PoE injector (802.3af) to supply power to the access point
- A router to act as your DHCP Server
Get connected
Connect your access point via the provided Ethernet cable to a PoE LAN port on your router or switch. If you do not have a PoE switch or router, you will need to use a PoE injector (not included).
Setting up your network
Set up a new network: The device will begin initial boot up. The LED will cycle through green, amber, and red. This is normal and can take up to 6 minutes. The device is not ready until the LED is consistently blinking green or solid green.
Add to an existing wireless network: Allow the access point to boot up and automatically update its firmware and configuration to match the existing network. This can take ten minutes or more. The LED will cycle through green, amber, and red. Once the LED is blinking green or solid green, the setup is complete and the AP has joined the network.
Configuration
Cisco Business Mobile app: No computer is needed for setup. Scan the QR code provided in the manual or go to cisco.com/go/cbapp to download the app and follow the installation instructions.
Web UI (Internet Browser) Setup: If you do not wish to use the mobile app, you can use the Web UI for setup. These instructions can be found online in the Web UI Setup Document.
Get support
For Cisco support and additional product documentation, including the Web UI Setup Document and Administration Guide, visit: https://cisco.com/go/cbw145ac
Official resources from the manual
Manufacturer information
Cisco Systems, Inc.
Practical help
Common problems
LED cycling through green, amber, and red
This is normal during the initial boot-up process. It can take up to 6 minutes. Wait until the LED is consistently blinking green or solid green.
Device does not power on
Ensure you are using an 802.3af PoE switch, router, or PoE injector to supply power to the access point.
Before use
- Active Internet connection
- PoE switch, router, or PoE injector (802.3af)
- Router acting as DHCP Server
- Phone or tablet with Wi-Fi capability (not connected to an active wireless network)
Specs in practice
- Pass-Thru Port
- Allows pass-through connectivity for other devices.
Images and diagrams
- Connect the access point to a PoE LAN port on your router or switch using the provided Ethernet cable.
Model compatibility
- Requires 802.3af PoE power source.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.