Clearaudio Smart Power 12V / 24V Safety and Instruction Manual

Important Safety Information

This document provides essential safety and operating instructions for the Clearaudio Smart Power 12V / 24V. Users must read these instructions carefully before use. Key safety points include keeping the device away from children, inspecting the device for damage before use, and ensuring the power cable is not damaged. If the device does not respond, try switching it off and on again using the power switch on the back of the unit.

Intended Use

The Smart Power 12V / 24V is designed exclusively as a power supply for operating a Clearaudio 12V / 24V turntable. Any other use or modification of the power supply is considered improper and may void the warranty.

Placement and Installation

• Surface: Place the device only on level surfaces.
• Environment: Avoid locations with direct sunlight, temperature fluctuations, or high humidity. Do not place the device near heaters, heat lamps, or other heat-generating equipment.
• Ventilation: Never block the ventilation slots or cover the device with cloths. Do not place objects on top of the device.
• Furniture: Installation in enclosed shelving systems or similar furniture is not allowed.
• Accessibility: Choose a location near a wall socket to ensure the power plug is always accessible.
• Water: Never operate the device near water.

Connection

• Plugs: Do not bypass safety features of polarized or grounded plugs. If the plug does not fit, have an electrician replace the outlet.
• Cable Safety: Pay attention to the area around plugs and sockets to ensure the power cable is not stepped on or pinched.
• Inspection: Regularly inspect the power cable for damage to the insulation. If damaged, have it replaced by a professional immediately.
• Disconnecting: Always unplug the device by holding the plug, not by pulling on the cable.

Maintenance

• Cleaning: Use only a soft cloth with a smooth surface or a soft brush. Do not use aggressive cleaning agents.
• Storage: If the device is not used for an extended period, it is recommended to disconnect the power supply from the mains.
• Magnetic Interference: The device contains magnetic storage components; keep external magnets away to prevent damage.

Health and Safety Warnings

• Hearing: Prolonged exposure to high volume can cause hearing damage.
• Heat: The housing may become warm during operation; be cautious when touching the device.
• Injury: Be careful during setup to avoid pinching fingers with heavy components or injury from sharp objects.

Service and Transport

• Service: There are no user-serviceable parts inside. Do not open the housing. All repairs must be handled by authorized dealers or the manufacturer.
• Transport: Always use the original packaging for transport. Ensure the device is packed exactly as it was delivered. Note: Ensure that both tanks (reservoir and waste fluid tank) are emptied before packing the device.

Disposal

Electrical and electronic waste, as well as batteries and accumulators, must not be disposed of with regular household waste. Dispose of these items at designated collection points in accordance with local regulations.