Power / Power Supplies
Delta BPV-1215BD 12V 1.25A Switching Adapter
Quick guide for the Delta BPV-1215BD 12V 1.25A switching adapter. Includes technical specifications, safety warnings, installation advice, and usage limits for LED lighting systems.
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
The Delta BPV-1215BD is a hermetic switching power supply designed for LED and IR LED illuminators. For continuous 24-hour operation, the rated current must not exceed 80% of the maximum load (1.25A). Ensure proper cooling conditions are maintained during operation.
Device description
This device features a metal box casing designed for wall mounting. It is an IP67-rated unit, meaning it is protected against dust and immersion in water, making it suitable for various environments.
Safety and warnings
- Damage: Do not use the device if the power cord or plug is damaged. Do not attempt to repair the device yourself; contact a service center or qualified personnel.
- Fluids: Keep the device away from caustic, staining, and viscous fluids.
- Handling: Do not touch the plug with wet hands. Always pull the plug, not the cable, to disconnect it from the socket.
- Supervision: The device is not intended for use by children or persons with limited physical, sensory, or mental capabilities unless supervised.
- Voltage: Before connecting, verify that the power source voltage is consistent with the rated voltage specified in the manual.
Installation and usage
The device is designed for wall mounting. Ensure the installation area allows for proper heat dissipation. If the power supply is used for continuous 24-hour operation, ensure the load is kept below 80% of the maximum capacity to prevent overheating and premature failure. The device is designed to automatically restart operation when power is restored after a break.
Technical specifications
- Adapter type: Switching
- Power voltage: 170 - 264 V AC
- Frequency range: 50 - 60 Hz
- Output voltage: 12 V DC
- Maximal load: 1.25 A
- Output power: 15 W
- Index of Protection: IP67
- Dimensions: 87 x 37 x 28 mm
- Weight: 0.125 kg
Disposal
The product must not be disposed of with household waste. It should be handed over to a designated collection and recycling system for electronic equipment to ensure environmentally friendly disposal.
Practical help
Common problems
Device not working or damaged
Do not use the device. Check the power cord and plug for damage. Do not attempt self-repair; contact a service center.
Overheating or failure during continuous use
Ensure the load is less than 80% of the maximum current (1.25A) for 24-hour operation and verify proper cooling conditions.
Before use
- Unpack the device and inspect for any physical defects.
- Verify that the input voltage (170-264V AC) matches your power source.
- Ensure the installation location is free from caustic, staining, or viscous fluids.
- Confirm that the load requirements do not exceed 15W (1.25A).
Model compatibility
- Designed specifically for LED and IR LED illuminators.
- Not intended for use by children or persons with limited capabilities without supervision.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.