Safety Data Sheet for Danfoss 160SZ Refrigeration Lubricant

Important Information from the Safety Data Sheet

This document is the Safety Data Sheet (SDS) for the Danfoss 160SZ refrigeration lubricant. The product is not classified as hazardous under the CLP regulation (EC No 1272/2008). Users should follow standard industrial hygiene practices, ensure adequate ventilation, and use appropriate personal protective equipment when handling the substance.

First Aid Measures

In case of exposure, follow these procedures:

• General: If you feel unwell, seek medical advice and show this safety data sheet or the label to the doctor. Place unconscious persons in the recovery position.
• Inhalation: Move the affected person to fresh air and keep them in a position comfortable for breathing.
• Skin Contact: Immediately remove contaminated clothing. Wash thoroughly with soap and water.
• Eye Contact: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
• Ingestion: Rinse mouth. Drink water as a precaution. Do NOT induce vomiting.

Handling and Storage

To maintain product integrity and safety, adhere to the following guidelines:

• Handling: Ensure adequate ventilation in the workspace. Avoid breathing vapors or aerosols. Avoid contact with eyes and skin. Do not eat, drink, or smoke while handling the product. Wash hands thoroughly after use.
• Storage: Keep in the original container. Keep the container tightly closed. Store in a cool, dry, and well-ventilated place. Protect from heat and direct sunlight. Keep away from food, drink, and animal feed.

Exposure Controls and Personal Protection

When handling the lubricant, use the following protective measures:

• Hand Protection: Wear suitable protective gloves (EN 374), such as nitrile rubber or neoprene (thickness > 0.35 mm). Consult the manufacturer for exact breakthrough times.
• Eye Protection: Wear safety glasses or goggles (EN 166).
• Skin and Body Protection: Wear suitable protective clothing.
• Respiratory Protection: Use respiratory protection if exposure through inhalation is possible.

Physical and Chemical Properties

Key technical specifications for Danfoss 160SZ:

• Physical State: Liquid
• Color: Colorless to yellow
• Odor: Mild
• Flash Point: 270 °C (Tagliabue Open Cup)
• Density: 0.977 at 20 °C
• Kinematic Viscosity: 33.7 mm²/s at 40 °C; 5.9 mm²/s at 100 °C
• Pour Point: approx. -46 °C
• Solubility: Practically insoluble in water

Disposal Considerations

Dispose of the product in accordance with local and national safety regulations. Do not allow the product to enter the sewage system. Ensure packaging is completely empty before disposal.