findmanualpdf.com

User Manual for ETA 236490000EN Refrigerator with Freezer

Quick guide for the ETA 236490000EN refrigerator with freezer. Includes installation, door reversal, temperature settings, food storage tips, and troubleshooting.

Quick answers from the manual

Quick answer

  • This manual provides instructions for the ETA 236490000EN refrigerator, including installation, door reversal, temperature control, and maintenance. p. 43, 62

Key actions

  • Reverse the door p. 49, 51
  • Adjust temperature p. 54

First start

  • Wait at least 4 hours before connecting to allow oil to flow back into the compressor. p. 47
Show 3 more answers Show less

Problems and fixes

Appliance does not work

Check thermostat setting, power plug, and fuse/circuit breaker.

p. 60

Technical specifications

Parameter Value Meaning Pages
Climate Class N, ST Designed for ambient temperatures of 16-38°C. p. 53

Where to find it in the PDF

  • Safety Information p. 43, 48
  • Installation p. 47, 52
  • Daily Use p. 53, 59
  • Troubleshooting p. 60, 61
Table of contents

Manual images

Click an image to enlarge
Show manual images (6) Show less

Quick guide from the manual

This manual provides essential information for the safe and efficient operation of your ETA 236490000EN refrigerator. It covers installation, daily use, maintenance, and troubleshooting.

Refrigerator overview diagram
Refrigerator overview diagram

Safety Information

  • Children and vulnerable people: This appliance can be used by children aged 8 and above under supervision. Keep packaging away from children to avoid suffocation.
  • General safety: Keep ventilation openings clear. Do not damage the refrigerant circuit. Do not use mechanical devices to accelerate defrosting.
  • Electrical safety: Ensure the power plug is accessible after installation. Do not use multiple portable socket-outlets at the rear.

Installation

Additional installation photo from page 12
Additional installation photo from page 12
Additional installation photo from page 32
Additional installation photo from page 32
Space requirements for installation
Space requirements for installation
Additional installation photo from page 72
Additional installation photo from page 72
  • Positioning: Install away from heat sources like radiators or direct sunlight. Ensure adequate air circulation around the back.
  • Leveling: Adjust the two leveling feet at the front of the unit to ensure the doors and magnetic seals align properly.
  • Electrical connection: Ensure the voltage and frequency match your domestic supply. The appliance must be earthed.
  • Door Reversal: The door can be reversed. Follow the step-by-step instructions in the manual, ensuring the unit is unplugged and empty.

Daily Use

Temperature setting recommendations
Temperature setting recommendations
  • Temperature Setting: Controlled by a thermostat with 8 settings (1 is warmest, 7 is coldest, 0 is off). Adjust based on ambient temperature.
  • Food Storage: Follow the provided tables for recommended storage times and methods for meat, fish, vegetables, and fruits.
  • Freezing: Use the freezer compartment for freezing fresh food and storing frozen items. Do not refreeze thawed food.

Maintenance and Cleaning

  • Cleaning: Switch off and unplug before cleaning. Use lukewarm water and neutral soap. Do not use abrasive cleaners or steam cleaners.
  • Drain Hole: Periodically clean the drain hole at the back of the fridge compartment to prevent defrost water from overflowing.
  • Defrosting: If ice becomes thick in the freezer, perform a complete defrost by unplugging the unit and allowing the ice to melt.

Troubleshooting

If the appliance does not work, check the thermostat setting, power plug, and fuse/circuit breaker. If the food is too warm, check temperature settings and ensure the door is not left open. Unusual noises may be resolved by leveling the unit or moving it slightly away from walls.

Practical help

Common problems

Appliance does not work

Check if the thermostat is set to 0, if the plug is connected, or if the fuse/circuit breaker is tripped.

Food is too warm

Check temperature settings, ensure the door isn't left open, or if a large amount of warm food was recently added.

Unusual noises

Ensure the appliance is level and not touching walls or other objects.

Before use

  • Unpack and check for damage.
  • Wait at least 4 hours before connecting to allow oil to flow back into the compressor.
  • Ensure adequate air circulation around the appliance.
  • Clean the interior with lukewarm water and neutral soap.
Show more Show less

Specs in practice

Climate Class
Determines the ambient temperature range for optimal performance (N, ST).
Temperature Settings
1 is the warmest, 7 is the coldest, 0 is off.

Images and diagrams

  • Overview of fridge components (shelves, crisper, freezer drawers).
  • Door reversal steps.
  • Space requirements diagram.

Model compatibility

  • Not intended for built-in installation.
  • Not for use at altitudes exceeding 2000m.

Manual page author

Emily Carter

User documentation editor

Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.