Software / Apps Services
Falmec Level Invisible Kitchen Hood User Manual
Quick guide for the Falmec Level Invisible kitchen hood, covering installation, operation, maintenance, and safety instructions.
Table of contents
Quick guide from the manual
The Falmec Level Invisible is a kitchen hood designed for domestic use. This manual provides essential instructions for installation, operation, and maintenance. Always ensure the hood is installed by qualified personnel and that all safety regulations are followed.
Installation
The hood can be installed in various configurations (wall or island). Ensure the wall is suitable for the weight of the hood (32 kg). Follow the specific template provided for cutting the top panel. The electrical connection must be performed by a qualified electrician, ensuring proper grounding and compliance with local regulations.
Operation
The hood is operated via a touch control panel located on the top. Key functions include:
- ON/OFF: Light and motor control.
- Speed Control: Four speed levels (1-4). Speed 4 is temporary.
- Timer: Automatic switch-off after 15 minutes.
- Hood Position: Adjustable height settings.
Switch on the hood at least one minute before cooking and leave it running for a few minutes after finishing to ensure complete extraction.
Maintenance
Regular maintenance is crucial for optimal performance:
- Metal Anti-Grease Filters: Wash at least once a month in hot water with dish soap or in a dishwasher at low temperatures (max 60°C).
- External Surfaces: Clean every 15 days using non-abrasive detergents or specific products like 'Magic Steel'.
- Internal Surfaces: Do not clean electrical or motor parts with liquids or solvents.
Safety
Do not connect the hood to exhaust pipes used for combustion fumes (boilers, fireplaces). Ensure adequate ventilation in the room if using gas appliances simultaneously. If the hood is unresponsive, temporarily disconnect the power for 5 seconds to reset.
For further assistance, contact Falmec S.p.A at [email protected] or visit falmec.com.
Official resources from the manual
Manufacturer information
Falmec S.p.a.
Practical help
Common problems
Touch control panel is completely inactive.
Temporarily disconnect the power supply to the appliance for about 5 seconds, preferably using the main switch, to restore normal operation.
Radio control not working.
Ensure the hood is away from electromagnetic interference sources (e.g., microwave ovens). Check the activation procedure and re-associate the remote if necessary.
Before use
- Ensure the hood is installed by qualified personnel.
- Verify that the electrical system is properly grounded.
- Check that the metal anti-grease filters are correctly installed.
- Ensure the hood is not connected to combustion exhaust pipes.
- Confirm that the voltage matches the identification plate inside the hood.
Specs in practice
- Max Thermal Power
- Use hobs with a maximum thermal power of 12 kW.
- Operating Distance (Remote)
- Maximum 5 meters, subject to electromagnetic interference.
Images and diagrams
- Pages 2-3: Dimensional drawings for wall and island installations.
- Page 4: Hole measurements for installation.
- Page 5: Motor rotation and electronic box positioning.
- Page 15/20/25/30/35/40/45/50/55/60: Touch control panel button functions.
Model compatibility
- Installation kit supplied is for masonry walls only; assess other systems for different wall materials.
- Optional carbon-zeolite filters available for internal recirculation mode.
- Optional radio control available (433.92 MHz).
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.