Tools / Power Tools
User Manual for Festool CT 15 and CT 25 Mobile Dust Extractor
Quick guide for the Festool CT 15 and CT 25 mobile dust extractors. Includes setup, operation, filter replacement, maintenance, and safety instructions.
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
This manual provides essential instructions for the safe and efficient operation of the Festool CT 15 and CT 25 mobile dust extractors. Always ensure the filter system is installed before use. Before performing any maintenance, cleaning, or changing consumables, disconnect the mains plug from the socket.
Device Overview
The device features a main power switch, a socket for connecting power tools, a suction power regulator, and a filter drawer. Refer to the parts diagram on page 3 for the exact location of the electrical outlet module, hose mount, and other components.
Commissioning
To prepare the unit for use:
- Insert the filter bag (see page 4).
- Connect the suction hose to the intake (see page 4).
- Connect the power cable to a mains socket.
Operation
The dust extractor can be operated in two modes:
- Automatic: The extractor starts automatically when the connected power tool is switched on.
- Manual: Press the MAN button to start the extractor manually.
Settings
You can adjust the suction power using the plus or minus buttons. The suction hose sleeve features a bypass function to prevent the hose from sticking to smooth surfaces; turn the ring to 'OPEN' to activate the bypass or 'CLOSE' to seal it.
Maintenance
Regular maintenance is required to ensure optimal performance:
- Filter Bag: Replace when full. Pull the tab on the filter bag to close it securely before removal.
- Filter Element: Replace the filter drawer when necessary.
- Cleaning: Regularly clean the fill level sensors and inspect them for damage.
Safety
This machine is for indoor use only. Do not extract hazardous dust, sparks, glowing particles, or chemically reactive materials. If foam or liquid escapes, switch off the machine immediately.
Manufacturer information
Festool
Practical help
Common problems
Excessive temperature
Switch off the dust extractor, let it cool down for approximately 5 minutes, then switch it back on.
Foam or liquid escaping
Switch off the machine immediately and empty the dirt trap.
Before use
- Ensure the filter bag is installed.
- Check that the suction hose is securely connected.
- Verify the power tool is switched off before connecting it to the extractor.
- Inspect the mains plug and cable for damage.
- Ensure the machine is on level ground.
Specs in practice
- Power consumption
- 350 - 1200 W
- Container capacity
- 15 l (CT 15) / 25 l (CT 25)
- Type of protection
- IP X4
Images and diagrams
- Page 3 provides a detailed diagram of the machine components, including the socket, hose mount, and controls.
Model compatibility
- Only use original Festool accessories and consumables.
- Only use the original Festool suction hose.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.