Home / Pet Supplies
User Manual for Frisco 2-Door Dog & Cat Kennel
Quick guide for the Frisco 2-Door Dog & Cat Kennel. Includes assembly instructions, door operation, size recommendations, and safety warnings.
Quick answers from the manual
Quick answer
- This manual provides assembly instructions, door operation steps, and safety guidelines for the Frisco 2-Door Dog & Cat Kennel. p. 2, 3
Key actions
- Assemble the kennel using the provided clips and bolts. p. 2
- Operate the door by squeezing the pins together. p. 3
First start
- Assemble the kennel using the provided clips and bolts as described in steps 1-5. p. 2
Problems and fixes
Door latch issues
Ensure pins are fully engaged in the latch mechanism.
p. 3Maintenance and reset
- Clean the kennel routinely with a mild, non-toxic cleaner and water. p. 3
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| XX-Small (20-inch) | 10 lbs / 6.2-inch height | Weight and height limit | p. 3 |
| Small (22-inch) | 20 lbs / 7.5-inch height | Weight and height limit | p. 3 |
Where to find it in the PDF
- Assembly p. 2
- Operation and Maintenance p. 3
- Warnings p. 4
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
This manual provides instructions for the assembly and safe operation of the Frisco 2-Door Dog & Cat Kennel. It includes parts identification, step-by-step assembly, door operation, and important safety guidelines for pet travel and training.
Parts included
- Carrier Top
- Carrier Base
- Bolts (4)
- Nuts (4)
- Side Clips (4)
- Door
- Tools required: Phillips head screwdriver
Assembly instructions
- Separate clips: Pull outwards from under the bottom part of the clip, then pull outwards and down from the top part to separate the top and bottom base parts.
- Prepare base: Turn the base over on its correct side. Insert the door into the base's two front holes. The lock can be positioned on either the left or right side.
- Attach top: Place the carrier top over the door by fitting the door's top bar ends into the carrier top's holes. Align the top to the base.
- Secure clips: Push the side clips into place to secure the top and bottom panels.
- Finalize: Connect all 4 bolts and nuts in the 4 corner holes. Insert bolts from the top and attach nuts from underneath. Ensure each nut is fully tightened.
Door operation
To open the front door, squeeze the two pins together and pull on the door while keeping the pins together. When closing the door, ensure it is completely shut in place before releasing the pins, and check to make sure the door is secure.
Weight and size recommendations
- XX-Small (20-inch): For pets up to 10 lbs and 6.2-inch height. Exterior Dims: 20.4" x 12.9" x 11.6". Interior Dims: 17.9" x 11.9" x 10.2".
- Small (22-inch): For pets up to 20 lbs and 7.5-inch height. Exterior Dims: 22.6" x 14.4" x 13.0". Interior Dims: 20.3" x 12.9" x 11.5".
Maintenance
Clean the kennel routinely with a mild, non-toxic cleaner and water.
Travel and training tips
- Proper sizing: Ensure your pet can stand up, turn around, and lie down comfortably.
- Plan ahead: Introduce your pet to the kennel well before any planned travel.
- Positive association: Leave the kennel out with the door open, place favorite toys or treats inside, and let your pet explore.
- Practice runs: Take your pet on short trips to places like the vet or a friend's house to get them used to the kennel.
- Air travel: Contact your airline to understand their specific guidelines for traveling with a pet.
Safety warnings
- This kennel is not designed to restrain dangerous or aggressive animals.
- Always remove collars, tags, leashes, and other items before placing the pet in the kennel to prevent choking.
- Never leave pets unattended in the kennel unless you are certain they respond well.
- Do not stack kennels with animals inside.
- Periodically inspect the plastic shell for cracks and tighten latches and screws.
- Never leave pets in a closed car on a hot day or in direct sunlight.
Practical help
Common problems
Door not closing securely
Ensure the pins are fully engaged in the latch mechanism. Squeeze the pins together to open and release to lock.
Difficulty assembling
Ensure the top and bottom base parts are aligned correctly before pushing the clips into place.
Before use
- Check all parts against the included list
- Have a Phillips head screwdriver ready
- Verify the kennel size is appropriate for your pet's weight and height
Specs in practice
- XX-Small (20-inch)
- For pets up to 10 lbs and 6.2-inch height
- Small (22-inch)
- For pets up to 20 lbs and 7.5-inch height
Images and diagrams
- The manual includes diagrams for the 5-step assembly process.
- Specific diagrams illustrate how to operate the door pins.
Model compatibility
- Ensure the kennel size matches your pet's weight and height requirements.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.