Tools / Hand Tools
Genmitsu 101-63-VC Vise Clamp Kit User Manual
Quick guide for the Genmitsu 101-63-VC Vise Clamp Kit. Learn how to install the clamp on T-slot or Aluminum/MDF spoilboards and operate the clamping mechanism.
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
This manual provides instructions for the Genmitsu 101-63-VC Vise Clamp Kit. The kit is designed to secure materials on CNC spoilboards. Key operations include securing the clamp base using the fixing screw and tightening the side screw to extend the clamping mechanism by 6mm.
Unboxing
The package includes the following items:
- Vise Clamp Kit
- Allen Wrench
The Usage Method
Follow these steps to operate the clamp:
- Secure the base: Tighten the fixing screw to secure the clamp in the desired position.
- Clamp the material: Tighten the side screw. This action causes the moving end of the clamp to extend, applying pressure to the material.
The clamp has a range of motion of 6mm.
Installation
Hybrid Spoilboard with T-Slot
- Slide the T-nut into the T-slot.
- Place the material and move the clamp to both sides of the material.
- Tighten the fixing screw to secure the clamp position.
- Tighten the side screw to clamp the material.
Aluminum/MDF Spoilboard
- Remove the T-nut from the clamp.
- Place the material and move the clamp to both sides of the material.
- Adjust the clamp position and screw the fixing screw into the hole of the spoilboard to secure the clamp.
- Tighten the side screw to clamp the material.
- Email: [email protected]
- Facebook messenger: https://m.me/SainSmart
- Facebook Group: Help and support is available from our Facebook Group
Support
If you need any assistance, please contact Genmitsu via:
Official resources from the manual
Practical help
Common problems
Clamp does not hold material securely
Ensure the side screw is tightened sufficiently to extend the moving end of the clamp.
Clamp is loose on the spoilboard
Verify that the fixing screw is fully tightened into the T-slot or the spoilboard hole.
Before use
- Verify all parts are present (Vise Clamp, Allen Wrench).
- Identify your spoilboard type (T-slot or Aluminum/MDF).
- If using an Aluminum/MDF spoilboard, remove the T-nut from the clamp base before installation.
Specs in practice
- Range of motion
- 6mm - the distance the moving end of the clamp extends when the side screw is tightened.
Images and diagrams
- The fixing screw is used to secure the clamp base to the spoilboard.
- The side screw is used to operate the clamping mechanism.
Model compatibility
- Compatible with T-slot spoilboards (using T-nut).
- Compatible with Aluminum/MDF spoilboards (using direct screw-in method).
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.