Lighting / Fixtures
Instruction Manual for Globo 19W LED Ceiling Light 67288D
Quick guide for the Globo 19W LED ceiling light, covering installation steps, electrical connection, and important information regarding the non-replaceable light source.
Table of contents
Quick guide from the manual
This document provides essential installation and safety information for the Globo 19W LED ceiling light (model 67288D). The primary focus is on the safe electrical installation of the fixture. Please note that the LED light source and the control gear are permanently integrated into the product design and cannot be replaced.
Installation
- Safety First: Before starting any work, ensure the power supply is switched off at the main circuit breaker.
- Mounting: Secure the mounting bracket to the ceiling using the provided screws and wall plugs.
- Wiring: Connect the house wiring to the terminal block on the fixture. Ensure the Neutral (N) and Live (L) wires are connected to the corresponding terminals.
- Final Assembly: Attach the light fixture to the mounting bracket and secure it in place.
- Power Up: Once securely mounted, switch the power supply back on at the circuit breaker.
Technical Data
- Model: 67288D
- Power: 19W LED SMD
- Voltage: 220-240V~ 50/60Hz
- Light Source: Non-replaceable
- Control Gear: Non-replaceable
Safety and Maintenance
The light source and control gear are not interchangeable due to the product's construction. Do not attempt to disassemble or modify the internal components. If the unit fails, the entire fixture must be replaced.
Manufacturer information
Globo Lighting
Practical help
Common problems
Light does not turn on
Check if the main circuit breaker is switched on and verify that the electrical connections at the terminal block are secure.
Light source failure
The LED light source and control gear are non-replaceable. If the light fails, the entire fixture must be replaced.
Before use
- Ensure the power supply is turned off at the circuit breaker.
- Verify that you have all mounting hardware included in the package.
- Check that the ceiling surface is suitable for mounting the fixture.
- Confirm the voltage of your electrical system matches the 220-240V requirement.
Specs in practice
- 220-240V~ 50/60Hz
- The required input voltage and frequency for the fixture to operate correctly.
Images and diagrams
- Diagram A: Shows the power supply must be switched OFF before installation.
- Diagram B: Illustrates the step-by-step mounting and wiring process.
- Diagram C: Shows the power supply can be switched ON after installation.
Model compatibility
- The light source is not replaceable.
- The control gear is not replaceable.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.