Lighting / Fixtures
Installation Guide for GLOBO 12380-24B Lesse Light
Quick installation and setup guide for the GLOBO 12380-24B Lesse light fixture, including wiring instructions, color temperature adjustment, and technical specifications.
Table of contents
Quick guide from the manual
This document provides essential instructions for the safe installation and operation of the GLOBO 12380-24B Lesse light series. The fixture features a 3-step color temperature switch. Please note that the LED light source and control gear are integrated into the product and are not user-replaceable.
Installation
- Safety First: Always turn off the main power supply at the circuit breaker before beginning any electrical work.
- Mounting: Drill holes in the ceiling according to the mounting bracket dimensions. Insert wall plugs and secure the bracket using the provided screws.
- Wiring: Pass the power supply cable through the opening in the bracket. Connect the wires to the terminal block (L and N).
- Final Assembly: Secure the light fixture onto the mounted bracket. Ensure all connections are firm and the fixture is flush against the ceiling.
- Power On: Restore power at the circuit breaker to test the light.
Operation and Settings
The light features a 3-step color temperature switch. You can toggle between 3000K, 4000K, and 6500K settings to achieve the desired lighting atmosphere.
Technical Specifications
- Model 12380-12B/12W: 1 x MAX 12W LED, 220-240V~ 50Hz
- Model 12380-18B/18W: 1 x MAX 18W LED, 220-240V~ 50Hz
- Model 12380-24B/24W: 1 x MAX 24W LED, 220-240V~ 50Hz
Safety and Maintenance
The light source and control gear are permanently fixed to the product construction. Do not attempt to replace or repair these components, as doing so will damage the unit and void any warranty. The product is classified as energy efficiency class F.
Manufacturer information
Globo Lighting
Practical help
Common problems
Light does not turn on after installation
Verify that the main power supply is switched on at the circuit breaker and check that the L and N wires are securely connected to the terminal block.
Cannot replace the LED light source
The LED light source and control gear are integrated into the product design and are not replaceable. The entire unit must be replaced if the light source fails.
Before use
- Ensure the main power supply is turned off at the circuit breaker.
- Verify the ceiling surface is suitable for mounting the bracket.
- Check that the voltage matches the 220-240V~ 50Hz requirement.
- Ensure all necessary tools (drill, screwdriver) are available.
Specs in practice
- 3-step switch
- Allows toggling between three color temperatures: 3000K (warm), 4000K (neutral), and 6500K (cool daylight).
- Energy Efficiency Class F
- Indicates the energy performance rating of the integrated LED light source.
Images and diagrams
- Step A: Turn off the power at the circuit breaker.
- Step B: Mounting the bracket to the ceiling and connecting the power wires to the terminal block.
- Step C: Turn the power back on after installation is complete.
Model compatibility
- The light source is not interchangeable.
- The control gear is not interchangeable.
- Designed for indoor use on standard 220-240V AC power grids.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.