User Manual for Godox WES1 Kit Wireless Microphone System
Quick guide for the Godox WES1 Kit wireless microphone system. Learn how to charge the transmitter and receiver, use the charging case, and maintain your device for optimal performance.
Quick answers from the manual
Quick answer
- The Godox WES1 Kit is a wireless lavalier microphone system designed for iPhone. It features 2.4GHz transmission, a 200m range, and noise cancellation. p. 1
Key actions
- Charge the transmitter using a USB-A to USB-C cable or the included charging case. p. 1
Problems and fixes
Ensure the transmitter is correctly inserted into the slots and the pins are touching the charging points.
p. 1Maintenance and reset
- Keep the device dry, avoid drops, and keep away from strong magnetic fields. p. 2
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Frequency | 2402-2480 MHz | Operating frequency range | p. 2 |
| WEC TX EIRP | 0.73 dBm | Maximum transmission power | p. 2 |
| WES1 RX EIRP | -7.77 dBm | Maximum transmission power | p. 2 |
Table of contents
Quick guide from the manual
The Godox WES1 Kit is a wireless lavalier microphone system designed for iPhone. It features 2.4GHz transmission, a 200m range, and noise cancellation. This guide provides essential information on charging, maintenance, and safety.
Product Overview
The WES1 Kit is a compact and portable wireless microphone system suitable for live streaming, interviews, and video recording. It includes a transmitter with a built-in lithium battery and a receiver with an MFi-certified Lightning plug.
Charging Instructions
Charging via USB-C Cable: The transmitter can be charged by connecting it to a power source using a USB-A to USB-C cable. The receiver supports simultaneous use and charging via a USB-A to USB-C cable.
Charging via Charging Case:
- Place the devices into the charging case and open the lid. The case will detect if the transmitters are correctly inserted.
- Indicators will light up if the charging pins are in contact.
- The case will charge the transmitters until full.
- If the lid is open, indicators and the digital display will turn off 5 seconds after the devices are fully charged.
- If the lid is closed, the digital display will turn off 1 minute after the devices are fully charged.
- The case itself is charged until the display shows 100.
Maintenance
- Avoid drops, strong impacts, or vibrations, as these can cause malfunctions.
- Keep the device in a dry place. It is not waterproof; moisture can cause rust and corrosion.
- Avoid sudden temperature changes, which can cause condensation.
- Keep away from strong magnetic fields, such as those generated by radio transmitters, to prevent interference.
Safety Warnings
- This is a high-precision instrument; handle with care.
- Do not disassemble. Repairs should be handled by an authorized service center.
- Keep dry and do not use in rain or humid conditions.
- Do not store in direct sunlight, near heat sources, or in dusty environments.
- Keep out of reach of children.
- Do not use in flammable or explosive environments.
- Do not store in temperatures exceeding 50°C.
Regulatory Information
This device complies with FCC Part 15 rules. It operates in the 2402-2480 MHz frequency range. The device is compliant with EU Directive 2014/53/EU.
Practical help
Common problems
Ensure the transmitter is correctly inserted into the slots and the pins are touching the charging points.
Keep the device away from strong magnetic fields or other radio transmitters.
Before use
- Ensure the device is kept dry and away from moisture.
- Check that the charging case lid is open to view charging status.
- Verify the environment is not too hot (above 50°C).
- Keep the device away from children.
Model compatibility
- Designed for iPhone (MFi certified Lightning plug).
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.