GOLDEN LIGHTING 1094-SF Ariella Semi Flush Ceiling Fixture

Product Overview

The Golden Lighting 1094-SF Ariella is a stylish semi-flush ceiling fixture designed to enhance the aesthetic of your home. This fixture arrives pre-assembled, making the installation process straightforward for an accredited professional. It is designed to provide both ambient and task lighting, and it is recommended to use the fixture with a dimmer switch to control light output levels effectively.

Safety and Preparation

Before beginning the installation, it is critical to ensure that the power supply is completely shut off at the fuse or circuit breaker. All installation work must be performed by an accredited professional to ensure safety and compliance with electrical codes. Always verify that you are using the specified bulb type and do not exceed the maximum recommended wattage for the fixture.

Installation Steps

The installation process begins by preparing the mounting strap. Secure the mounting strap to the junction box using the provided screws. Ensure the mounting screws are properly aligned to protrude through the canopy once it is lifted to the ceiling. Before connecting the wires, have an assistant support the weight of the fixture.

Wiring the Fixture

Proper wiring is essential for safe operation. Connect the fixture wires to the house supply wires from the junction box as follows:

• Hot to Hot: Connect the smooth, black, or transparent wire with a black inner thread to the house hot wire.
• Neutral to Neutral: Connect the ribbed, white, or transparent wire with a white inner thread to the house neutral wire.
• Ground to Ground: Connect the copper, bare metal, green, or transparent wire with a green inner thread to the house ground wire.

If there is no house ground wire, use the provided ground screw on the mounting bracket to secure the fixture's ground wire. Ensure all wire connections are twisted together securely and covered with appropriate wire connectors.

Finishing the Installation

Once the wiring is complete and tucked into the junction box, lift the canopy over the mounting strap and secure it using the decorative nuts. Carefully slide the glass shade and cap over the socket, and secure them in place by tightening the socket ring. Finally, install the appropriate light bulb, restore power, and test the fixture to ensure it is functioning correctly.